MC68HC711D3CFNE2 Datasheet, PDF (18/124 Pages) Freescale Semiconductor, Inc – Power Saving STOP and WAIT Modes

Freescale Semiconductor, Inc.
2.10 Port Signals
In the 44-pin PLCC package, 32 input/output lines are arranged into four 8-bit ports:
A, B, C, and D. The lines of ports B, C, and D are fully bidirectional. Each of these four
ports serves a purpose other than I/O, depending on the operating mode or peripheral
functions selected. Note that ports B, C, and two bits of port D are available for I/O
functions only in single-chip and bootstrap modes. Refer to Table 2-1 for details about
the 32 port signals' functions within different operating modes.
Port/Bit
PA0
PA1
PA2
PA3
PA4*
PA5
PA6*
PA7
PB0
PB1
PB2
PB3
PB4
PB5
PB6
PB7
PC0
PC1
PC2
PC3
PC4
PC5
PC6
PC7
PD0
PD1
PD2
PD3
PD4
PD5
PD6
PD7
Table 2-1 Port Signal Functions
Single-Chip and
Bootstrap Mode
Expanded Multiplexed and
Special Test Mode
PA0/IC3
PA1/IC2
PA2/IC1
PA3/OC5/IC4/OC1
PA4/OC4/OC1
PA5/OC3/OC1
PA6/OC2/OC1
PA7/PAI/OC1
PB0
ADDR8
PB1
ADDR9
PB2
ADDR10
PB3
ADDR11
PB4
ADDR12
PB5
ADDR13
PB6
ADDR14
PB7
ADDR15
PC0
ADDR0/DATA0
PC1
ADDR1/DATA1
PC2
ADDR2/DATA2
PC3
ADDR3/DATA3
PC4
ADDR4/DATA4
PC5
ADDR5/DATA5
PC6
ADDR6/DATA6
PC7
ADDR7/DATA7
PD0/RxD
PD1/TxD
PD2/MISO
PD3/MOSI
PD4/SCK
PD5/SS
PD6
AS
PD7
R/W
*In the 40-pin package, pins PA4 and PA6 are not bonded. Their associated I/O and output compare functions are
not available externally. They can still be used as internal software timers, however.
PIN DESCRIPTIONS
2-6
TECHNICAL DATA
For More Information On This Product,
Go to: www.freescale.com