DS617 Datasheet, PDF (88/88 Pages) Xilinx, Inc – MultiBoot Bitstream, Design Revision Storage

R
Platform Flash XL High-Density Configuration and Storage Device
Date
11/30/09
01/07/10
Version
3.0
3.0.1
Revision
• See XCN09032, DS617, High-Density Configuration and Storage Device Data Sheet Revision,
v3.0, for detailed product revisions:
• Product change from preliminary to production phase.
• Updated "Features" section.
• Removed references and placeholders to V_DDQ operation in the 1.7V to 2.0V range.
• Added support for Virtex-6 FPGAs.
• Removed Figure 7, containing a detailed system application schematic. User is referred to
duplicated schematic in UG438, Platform Flash XL Configuration and Storage Device User Guide.
• Inserted notes in "Description," page 1 regarding Platform Flash XL support.
• Updated Platform Flash XL configuration instructions in "FPGA Configuration Overview," page 8.
• Configuration sequence removed from "Slave SelectMAP Configuration Mode," page 9. User is
referred to the Configuration Interface section of the respective FPGA Configuration User Guide.
• Removed Master SelectMAP Mode and Master BPI-Up Mode subheadings from "Alternate
Configuration Modes," page 9. User is referred to UG438, Platform Flash XL Configuration and
Storage Device User Guide.
• Updated Figure 21, page 41.
• Updated Table 4, page 8, Table 29, page 50, Table 33, page 58.
• Made typographical edits.
Notice of Disclaimer
THE XILINX HARDWARE FPGA AND CPLD DEVICES REFERRED TO HEREIN (“PRODUCTS”) ARE SUBJECT TO THE TERMS AND
CONDITIONS OF THE XILINX LIMITED WARRANTY WHICH CAN BE VIEWED AT http://www.xilinx.com/warranty.htm. THIS LIMITED
WARRANTY DOES NOT EXTEND TO ANY USE OF PRODUCTS IN AN APPLICATION OR ENVIRONMENT THAT IS NOT WITHIN THE
SPECIFICATIONS STATED IN THE XILINX DATA SHEET. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PRODUCTS ARE NOT DESIGNED OR INTENDED TO BE FAIL-SAFE OR FOR USE IN ANY APPLICATION REQUIRING FAIL-SAFE
PERFORMANCE, SUCH AS LIFE-SUPPORT OR SAFETY DEVICES OR SYSTEMS, OR ANY OTHER APPLICATION THAT INVOKES
THE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). USE OF PRODUCTS IN CRITICAL APPLICATIONS IS AT THE SOLE RISK OF CUSTOMER, SUBJECT TO
APPLICABLE LAWS AND REGULATIONS.
DS617 (v3.0.1) January 07, 2010
www.xilinx.com
Product Specification
88