SM320LF2407-EP Datasheet, PDF (94/112 Pages) Texas Instruments – 
DSP CONTROLLERS

SM320LF2407AĆEP
DSP CONTROLLERS
SGUS036B − JULY 2003 − REVISED OCTOBER 2003
Flash parameters @40 MHz CLOCKOUT^†
PARAMETER
MIN TYP MAX UNIT
Clear/Programming time‡
Time/Word (16-bit)
Time/4K Sector
Time/12K Sector
30
µs
130
ms
400
ms
Erase time‡
Time/4K Sector
Time/12K Sector
350
ms
1
s
ICCP (VCCP pin current)
Indicates the typical/maximum current consumption during the
Clear-Erase-Program (C-E-P) cycle
5
15 mA
† _{TI releases upgrades to the Flash algorithms for these devices; hence, these typical values are subject to change.}
‡ _{The indicated time does not include the time it takes to load the C-E-P algorithm and the code (to be programmed) onto on-chip RAM. The values}
specified are when VDD = 3.3 V and VCCP = 5 V, and any deviation from these values could affect the timing parameters. Aging and process variance
could also impact the timing parameters.
94
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443