LM3S5956-IQR80-C1 Datasheet, PDF (907/1144 Pages) Texas Instruments – Stellaris® LM3S5956 Microcontroller

NRND: Not recommended for new designs.
Stellaris^® LM3S5956 Microcontroller
USB Host Configure Receive Type Endpoint 1 (USBRXTYPE1)
Base 0x4005.0000
Offset 0x11C
Type R/W, reset 0x00
7
6
5
4
3
2
1
0
SPEED
PROTO
TEP
Type R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset
0
0
0
0
0
0
0
0
Bit/Field
7:6
Name
SPEED
Type
R/W
Reset
0x0
Description
Operating Speed
This bit field specifies the operating speed of the target Device:
Value Description
0x0 Default
The target is assumed to be using the same connection speed
as the USB controller.
0x1 Reserved
0x2 Full
0x3 Low
5:4
PROTO
R/W
0x0
Protocol
Software must configure this bit field to select the required protocol for
the receive endpoint:
Value Description
0x0 Control
0x1 Isochronous
0x2 Bulk
0x3 Interrupt
3:0
TEP
R/W
0x0
Target Endpoint Number
Software must set this value to the endpoint number contained in the
receive endpoint descriptor returned to the USB controller during Device
enumeration.
October 06, 2012
907
Texas Instruments-Production Data