LM3S5956-IQR80-C1 Datasheet, PDF (606/1144 Pages) Texas Instruments – Stellaris® LM3S5956 Microcontroller

NRND: Not recommended for new designs.
Analog-to-Digital Converter (ADC)
Bit/Field
5
4
3
2
Name
DCINT5
DCINT4
DCINT3
DCINT2
Type
R/W
R/W
R/W
R/W
Reset
0
0
0
0
Description
Digital Comparator Interrupt 5
Value Description
1 Resets the Digital Comparator 5 interrupt unit to its initial
conditions.
0 No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
Digital Comparator Interrupt 4
Value Description
1 Resets the Digital Comparator 4 interrupt unit to its initial
conditions.
0 No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
Digital Comparator Interrupt 3
Value Description
1 Resets the Digital Comparator 3 interrupt unit to its initial
conditions.
0 No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
Digital Comparator Interrupt 2
Value Description
1 Resets the Digital Comparator 2 interrupt unit to its initial
conditions.
0 No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
606
October 06, 2012
Texas Instruments-Production Data