LM3S5956-IQR80-C1 Datasheet, PDF (1084/1144 Pages) Texas Instruments – Stellaris® LM3S5956 Microcontroller

Electrical Characteristics
NRND: Not recommended for new designs.
Table 24-30. Nominal Power Consumption
Parameter Parameter Name
Conditions
I_{DD_RUN} Run mode 1 (Flash loop)
V_DD = 3.3 V
Code= while(1){} executed out of Flash
Peripherals = All ON
System Clock = 80 MHz (with PLL)
Temp = 25°C
I_{DD_SLEEP} Sleep mode
V_DD = 3.3 V
Peripherals = All clock gated
System Clock = 80 MHz (with PLL)
Temp = 25°C
I_{DD_DEEPSLEEP} Deep-sleep mode
Peripherals = All OFF
System Clock = IOSC30KHZ/64
Temp = 25°C
I_{HIB_NORTC}
Hibernate mode (external wake,
RTC disabled, I/O not powered^a)
V_BAT = 3.0 V
V_DD = 0 V
V_DDA = 0 V
Peripherals = All OFF
System Clock = OFF
Hibernate Module = 0 kHz
I_{HIB_RTC}
Hibernate mode (RTC enabled,
I/O not powered^a)
V_BAT = 3.0 V
V_DD = 0 V
V_DDA = 0 V
Peripherals = All OFF
System Clock = OFF
Hibernate Module = 32 kHz
a. The VDD3ON mode must be disabled for the I/O ring to be unpowered.
Nom Unit
90
mA
20
mA
550
µA
30
µA
44
µA
24.18.2
Maximum Current Consumption
The current measurements specified in the table that follows are maximum values under the following
conditions:
■ V_DD = 3.6 V
■ V_DDC = 1.3 V
■ V_BAT = 3.25 V
■ V_DDA = 3.6 V
■ Temperature = 85°C
■ Clock source (MOSC) = 16.348-MHz crystal oscillator
1084
Texas Instruments-Production Data
October 06, 2012