LM3S5956-IQR80-C1 Datasheet, PDF (860/1144 Pages) Texas Instruments – Stellaris® LM3S5956 Microcontroller

NRND: Not recommended for new designs.
Universal Serial Bus (USB) Controller
OTG A /
Host
Register 69: USB Transmit Hub Port Endpoint 0 (USBTXHUBPORT0), offset
0x083
Register 70: USB Transmit Hub Port Endpoint 1 (USBTXHUBPORT1), offset
0x08B
Register 71: USB Transmit Hub Port Endpoint 2 (USBTXHUBPORT2), offset
0x093
Register 72: USB Transmit Hub Port Endpoint 3 (USBTXHUBPORT3), offset
0x09B
Register 73: USB Transmit Hub Port Endpoint 4 (USBTXHUBPORT4), offset
0x0A3
Register 74: USB Transmit Hub Port Endpoint 5 (USBTXHUBPORT5), offset
0x0AB
Register 75: USB Transmit Hub Port Endpoint 6 (USBTXHUBPORT6), offset
0x0B3
Register 76: USB Transmit Hub Port Endpoint 7 (USBTXHUBPORT7), offset
0x0BB
Register 77: USB Transmit Hub Port Endpoint 8 (USBTXHUBPORT8), offset
0x0C3
Register 78: USB Transmit Hub Port Endpoint 9 (USBTXHUBPORT9), offset
0x0CB
Register 79: USB Transmit Hub Port Endpoint 10 (USBTXHUBPORT10), offset
0x0D3
Register 80: USB Transmit Hub Port Endpoint 11 (USBTXHUBPORT11), offset
0x0DB
Register 81: USB Transmit Hub Port Endpoint 12 (USBTXHUBPORT12), offset
0x0E3
Register 82: USB Transmit Hub Port Endpoint 13 (USBTXHUBPORT13), offset
0x0EB
Register 83: USB Transmit Hub Port Endpoint 14 (USBTXHUBPORT14), offset
0x0F3
Register 84: USB Transmit Hub Port Endpoint 15 (USBTXHUBPORT15), offset
0x0FB
USBTXHUBPORTn is an 8-bit read/write register that, like USBTXHUBADDRn, only must be written
when a full- or low-speed Device is connected to transmit endpoint EPn via a USB 2.0 hub. This
register records the port of the USB 2.0 hub through which the target associated with the endpoint
is accessed.
Note: USBTXHUBPORT0 is used for both receive and transmit for endpoint 0.
860
October 06, 2012
Texas Instruments-Production Data