LM3S5956-IQR80-C1 Datasheet, PDF (840/1144 Pages) Texas Instruments – Stellaris® LM3S5956 Microcontroller

NRND: Not recommended for new designs.
Universal Serial Bus (USB) Controller
Bit/Field
4
Name
CONN
Type
R/W
Reset
0
Description
Enable Connect Interrupt
Value Description
1 An interrupt is sent to the interrupt controller when the CONN bit
in the USBIS register is set.
0 The CONN interrupt is suppressed and not sent to the interrupt
controller.
3
SOF
R/W
0
Enable Start-of-Frame Interrupt
Value Description
1 An interrupt is sent to the interrupt controller when the SOF bit
in the USBIS register is set.
0 The SOF interrupt is suppressed and not sent to the interrupt
controller.
2
BABBLE
R/W
1
Enable Babble Interrupt
Value Description
1 An interrupt is sent to the interrupt controller when the BABBLE
bit in the USBIS register is set.
0 The BABBLE interrupt is suppressed and not sent to the interrupt
controller.
1
RESUME
R/W
1
Enable RESUME Interrupt
Value Description
1 An interrupt is sent to the interrupt controller when the RESUME
bit in the USBIS register is set.
0 The RESUME interrupt is suppressed and not sent to the interrupt
controller.
0
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
OTG B / Device Mode
USB Interrupt Enable (USBIE)
Base 0x4005.0000
Offset 0x00B
Type R/W, reset 0x06
7
6
5
4
3
reserved
DISCON reserved SOF
Type RO
Reset
0
RO
R/W
RO
R/W
0
0
0
0
2
1
0
RESET RESUME SUSPEND
R/W
R/W
R/W
1
1
0
840
October 06, 2012
Texas Instruments-Production Data