SMJ320C6414 Datasheet, PDF (91/133 Pages) Texas Instruments – FIXED-POINT DIGITAL SIGNAL PROCESSORS

SMJ320C6414, SMJ320C6415, SMJ320C6416
FIXEDĆPOINT DIGITAL SIGNAL PROCESSORS
SGUS050A − JANUARY 2004 − REVISED MARCH 2004
PROGRAMMABLE SYNCHRONOUS INTERFACE TIMING (CONTINUED)
ECLKOUTx
CEx
ABE[7:0] or BBE[1:0]
AEA[22:3] or BEA[20:1]
AED[63:0] or BED[15:0]
ARE/SDCAS/SADS/SRE¶
AOE/SDRAS/SOE¶
AWE/SDWE/SWE¶
1
1
2
3
BE1
BE2
BE3
BE4
4
5
EA1
EA2
EA3
EA4
10
10
11
Q1
Q2
Q3
Q4
8
8
12
12
† _{These C64x devices have two EMIFs (EMIFA and EMIFB). All EMIFA signals are prefixed by an “A” and all EMIFB signals are prefixed by a}
“B”. Throughout the rest of this document, in generic EMIF areas of discussion, the prefix “A” or “B” may be omitted [e.g., the programmable
synchronous interface access signals are shown as generic (SADS/SRE, SOE, and SWE) instead of ASADS/ASRE, ASOE, and ASWE (for
EMIFA) and BSADS/BSRE, BSOE, and BSWE (for EMIFB)].
‡ _{The write latency and the length of CEx assertion are programmable via the SYNCWL and CEEXT fields, respectively, in the EMIFx CE Space}
Secondary Control register (CExSEC). In this figure, SYNCWL = 0 and CEEXT = 0.
§ _{The following parameters are programmable via the EMIF CE Space Secondary Control register (CExSEC):}
− Read latency (SYNCRL): 0-, 1-, 2-, or 3-cycle read latency
− Write latency (SYNCWL): 0-, 1-, 2-, or 3-cycle write latency
− CEx assertion length (CEEXT): For standard SBSRAM or ZBT SRAM interface, CEx goes inactive after the final command has been issued
(CEEXT = 0). For synchronous FIFO interface with glue, CEx is active when SOE is active (CEEXT = 1).
− Function of SADS/SRE (RENEN): For standard SBSRAM or ZBT SRAM interface, SADS/SRE acts as SADS with deselect cycles
(RENEN = 0). For FIFO interface, SADS/SRE acts as SRE with NO deselect cycles (RENEN = 1).
− Synchronization clock (SNCCLK): Synchronized to ECLKOUT1 or ECLKOUT2
¶ _{ARE/SDCAS/SADS/SRE, AOE/SDRAS/SOE, and AWE/SDWE/SWE operate as SADS/SRE, SOE, and SWE, respectively, during}
programmable synchronous interface accesses.
Figure 25. Programmable Synchronous Interface Write Timing for EMIFA and EMIFB
(With Write Latency = 0)^{†‡§}
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
91