English
Language : 

SMJ320C6414 Datasheet, PDF (51/133 Pages) Texas Instruments – FIXED-POINT DIGITAL SIGNAL PROCESSORS
SMJ320C6414, SMJ320C6415, SMJ320C6416
FIXEDĆPOINT DIGITAL SIGNAL PROCESSORS
SGUS050A − JANUARY 2004 − REVISED MARCH 2004
Terminal Functions (Continued)
SIGNAL
NAME
NO.
TYPE†
IPD/
IPU‡
DESCRIPTION
MULTICHANNEL BUFFERED SERIAL PORT 1 (McBSP1)
CLKS1/
URADDR3§
Y8
I
McBSP1 external clock source (as opposed to internal) (I) [default] or UTOPIA receive
address 3 pin (I)
CLKR1/
URADDR2§
AB7 I/O/Z
McBSP1 receive clock (I/O/Z) [default] or UTOPIA receive address 2 pin (I)
CLKX1/
URADDR4§
T12 I/O/Z
McBSP1 transmit clock (I/O/Z) [default] or UTOPIA receive address 4 pin (I)
DR1/
UXADDR1§
V11
I
McBSP1 receive data (I) [default] or UTOPIA transmit address 1 pin (I)
DX1/
UXADDR4§
Y10 I/O/Z
McBSP1 transmit data (O/Z) [default] or UTOPIA transmit address 4 pin (I)
FSR1/
UXADDR2§
AA8 I/O/Z
McBSP1 receive frame sync (I/O/Z) [default] or UTOPIA transmit address 2 pin (I)
FSX1/
UXADDR3§
AA11 I/O/Z
McBSP1 transmit frame sync (I/O/Z) [default] or UTOPIA transmit address 3 pin (I)
MULTICHANNEL BUFFERED SERIAL PORT 0 (McBSP0)
CLKS0
F4
I
IPD McBSP0 external clock source (as opposed to internal)
CLKR0
F5
I/O/Z IPD McBSP0 receive clock
CLKX0
K9
I/O/Z IPD McBSP0 transmit clock
DR0
G6
I
IPU McBSP0 receive data
DX0
E4
O/Z
IPU McBSP0 transmit data
FSR0
D3
I/O/Z
IPD McBSP0 receive frame sync
FSX0
H7
I/O/Z
IPD McBSP0 transmit frame sync
TIMER 2
TOUT2
F7
O/Z
IPD Timer 2 or general-purpose output
TINP2
D5
I
IPD Timer 2 or general-purpose input
TIMER 1
TOUT1
G8
O/Z
IPD Timer 1 or general-purpose output
TINP1
D6
I
IPD Timer 1 or general-purpose input
TIMER 0
TOUT0
H9
O/Z
IPD Timer 0 or general-purpose output
TINP0
E7
I
IPD Timer 0 or general-purpose input
† I = Input, O = Output, Z = High impedance, S = Supply voltage, GND = Ground
‡ IPD = Internal pulldown, IPU = Internal pullup. (These IPD/IPU signal pins feature a 30-kΩ IPD or IPU resistor. To pull up a signal to the opposite
supply rail, a 1-kΩ resistor should be used.)
§ For the C6415 and C6416 devices, these pins are multiplexed pins. For more details, see the Device Configurations section of this data sheet.
The C6414 device does not support the PCI or UTOPIA peripherals; therefore, these MUXed peripheral pins are standalone peripheral functions
for this device.
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
51