MC68HC908AZ60 Datasheet, PDF (448/480 Pages) Motorola, Inc – HCMOS Microcontroller Unit

SpeciÞcations
2. f_PUMP is defined as the charge pump clock frequency required for Program, Erase, and Margin Read operations.
3. fls_PULSES is defined as the number of pulses used during FLASH programming required by the Smart Program Algorithm.
4. t_STEP is defined as the amount of time during one page program cycle that HVEN is held high.
5. t_ROW is defined as the cumulative time a row can see the program voltage before the row must be erased before further
programming.
6. t_RECOVERY is defined as the minimum number of dummy reads of any FLASH location before accurate data is read from
the memory after Margin Read mode is used.
7. The minimum row erase endurance value specifies each row of the FLASH memory is guaranteed to work for at least this
many erase cycles.
8. The minimum row program endurance value specifies each row of the FLASH memory is guaranteed to work for at least
this many program cycles.
9. The flash is guaranteed to retain data over the entire specified temperature range for at least the minimum time specified.
10. Maximum program time must not exceed 100ms as the product of pulses and step size. Always use the programming
algorithm in the flash sections to ensure fastest flash programming.
MC68HC908AZ60 — Rev 2.0
446
Specifications
14-specs
MOTOROLA