MC68HC908AZ60 Datasheet, PDF (161/480 Pages) Motorola, Inc – HCMOS Microcontroller Unit

Configuration Register (CONFIG-2)
Configuration Register (CONFIG-2)
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Functional Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Introduction
This section describes the configuration register (CONFIG-2). This
register contains bits that configure these options:
• Configures either the MC68HC08AZxx emulator or the
MC68HC08ASxx emulator
• Disables the CAN module
Functional Description
The configuration register is a write-once register. Out of reset, the
configuration register will read the default. Once the register is written,
further writes will have no effect until a reset occurs.
Address: $FE09
Bit 7
6
5
4
3
2
1
Bit 0
Read:
0
0
0 MSCAND 0
0
0
AZxx
Write:
Reset: 0
0
0
1
0
0
0
0
Figure 1. Configuration Register (CONFIG-2)
1-config-2
MOTOROLA
Configuration Register (CONFIG-2)
MC68HC908AZ60 — Rev 2.0
159