PIC24FJ128GA Datasheet, PDF (210/232 Pages) Microchip Technology – General Purpose, 16-Bit Flash Microcontrollers

PIC24FJ128GA FAMILY
26.2 AC Characteristics and Timing Parameters
The information contained in this section defines the PIC24FJ128GA family AC characteristics and timing parameters.
TABLE 26-12: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
AC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Operating voltage VDD range as described in Section 26.1 “DC Characteristics”.
FIGURE 26-1:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1 – for all pins except OSC2
Load Condition 2 – for OSC2
VDD/2
RL
Pin
CL
VSS
Pin
CL
VSS
RL = 464Ω
CL = 50 pF for all pins except OSC2
15 pF for OSC2 output
TABLE 26-13: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
DO50 COSC2 OSC2/CLKO pin
—
— 15 pF In XT and HS modes when
external clock is used to drive
OSC1.
DO56 CIO
DO58 CB
All I/O pins and OSC2
SCLx, SDAx
—
— 50 pF EC mode
—
— 400 pF In I²C™ mode
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
DS39747C-page 208
Preliminary
© 2006 Microchip Technology Inc.