PIC24FJ128GA Datasheet, PDF (205/232 Pages) Microchip Technology – General Purpose, 16-Bit Flash Microcontrollers

PIC24FJ128GA FAMILY
TABLE 26-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Operating Current (IDD)⁽²⁾
DC20
DC20a
1.6
4.0
mA
1.6
4.0
mA
-40°C
+25°C
2.5V⁽³⁾
DC20b
DC20d
DC20e
1.6
4.0
mA
1.6
4.0
mA
1.6
4.0
mA
+85°C
-40°C
+25°C
3.6V⁽⁴⁾
1 MIPS
DC20f
1.6
4.0
mA
+85°C
DC23
DC23a
6.0
12
mA
6.0
12
mA
-40°C
+25°C
2.5V⁽³⁾
DC23b
DC23d
DC23e
6.0
12
mA
6.0
12
mA
6.0
12
mA
+85°C
-40°C
+25°C
3.6V⁽⁴⁾
4 MIPS
DC23f
6.0
12
mA
+85°C
DC24
DC24a
20
32
mA
20
32
mA
-40°C
+25°C
2.5V⁽³⁾
DC24b
DC24d
DC24e
20
32
mA
20
32
mA
20
32
mA
+85°C
-40°C
+25°C
3.6V⁽⁴⁾
16 MIPS
DC24f
20
32
mA
+85°C
DC31
DC31a
70
150
μA
100
200
μA
-40°C
+25°C
2.5V⁽³⁾
DC31b
DC31d
DC31e
200
400
μA
70
150
μA
100
200
μA
+85°C
-40°C
+25°C
3.6V⁽⁴⁾
LPRC (31 kHz)
DC31f
200
400
μA
+85°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all IDD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to VDD.
MCLR = VDD; WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are
operational. No peripheral modules are operating.
3: On-chip voltage regulator disabled (ENVREG tied to VSS).
4: On-chip voltage regulator enabled (ENVREG tied to VDD).
© 2006 Microchip Technology Inc.
Preliminary
DS39747C-page 203