PIC24FJ128GA Datasheet, PDF (176/232 Pages) Microchip Technology – General Purpose, 16-Bit Flash Microcontrollers

PIC24FJ128GA FAMILY
REGISTER 21-1: CMCON: COMPARATOR CONTROL REGISTER
Upper Byte:
R/W-0
U-0
CMIDL
—
bit 15
R/C-0
C2EVT
R/C-0
C1EVT
R/W-0
C2EN
R/W-0
C1EN
R/W-0
R/W-0
C2OUTEN C1OUTEN
bit 8
Lower Byte:
R-0
R-0
C2OUT C1OUT
bit 7
R/W-0
C2INV
R/W-0
C1INV
R/W-0
C2NEG
R/W-0
C2POS
R/W-0
C1NEG
R/W-0
C1POS
bit 0
bit 15
bit 14
bit 13
bit 12
bit 11
bit 10
bit 9
bit 8
CMIDL: Stop in Idle Mode
1 = When device enters Idle mode, module does not generate interrupts. Module is still enabled.
0 = Continue normal module operation in Idle mode
Unimplemented: Read as ‘0’
C2EVT: Comparator 2 Event
1 = Comparator output changed states
0 = Comparator output did not change states
C1EVT: Comparator 1 Event
1 = Comparator output changed states
0 = Comparator output did not change states
C2EN: Comparator 2 Enable
1 = Comparator is enabled
0 = Comparator is disabled
C1EN: Comparator 1 Enable
1 = Comparator is enabled
0 = Comparator is disabled
C2OUTEN: Comparator 2 Output Enable
1 = Comparator output is driven on the output pad
0 = Comparator output is not driven on the output pad
C1OUTEN: Comparator 1 Output Enable
1 = Comparator output is driven on the output pad
0 = Comparator output is not driven on the output pad
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
DS39747C-page 174
Preliminary
© 2006 Microchip Technology Inc.