TC290 Datasheet, PDF (7/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller

TC290 / TC297 / TC298 / TC299 BB-Step
Summary of Features
1
Summary of Features
The TC29x product family has the following features:
• High Performance Microcontroller with three CPU cores
• One 32-bit super-scalar TriCore CPUs (TC1.6P), having the following features:
– Superior real-time performance
– Strong bit handling
– Fully integrated DSP capabilities
– Multiply-accumulate unit able to sustain 2 MAC operations per cycle
– up to 300 MHz operation at full temperature range
– up to 120 / 240 Kbyte Data Scratch-Pad RAM (DSPR)
– up to 32 Kbyte Instruction Scratch-Pad RAM (PSPR)
– 16 / 32 Kbyte Instruction Cache (ICACHE)
– 8 Kbyte Data Cache (DCACHE)
• Lockstepped shadow core for TC1.6P core 1
• Multiple on-chip memories
– All embedded NVM and SRAM are ECC protected
– up to 8 Mbyte Program Flash Memory (PFLASH)
– up to 768 Kbyte Data Flash Memory (DFLASH) usable for EEPROM emulation
– 32 Kbyte Memory (LMU)
– BootROM (BROM)
• 128-Channel DMA Controller with safe data transfer
• Sophisticated interrupt system (ECC protected)
• High performance on-chip bus structure
– 64-bit Cross Bar Interconnect (SRI) giving fast parallel access between busmasters, CPUs and memories
– 32-bit System Peripheral Bus (SPB) for on-chip peripheral and functional units
– One bus bridge (SFI Bridge)
• Safety Management Unit (SMU) handling safety monitor alarms
• Memory Test Unit with ECC, Memory Initialization and MBIST functions (MTU)
• Hardware I/O Monitor (IOM) for checking of digital I/O
• Versatile On-chip Peripheral Units
– Four Asynchronous/Synchronous Serial Channels (ASCLIN) with hardware LIN support (V1.3, V2.0, V2.1
and J2602) up to 50 MBaud
– Six Queued SPI Interface Channels (QSPI) with master and slave capability upto 50 Mbit/s
– High Speed Serial Link (HSSL) for serial inter-processor communication up to 320Mbit/s
– Two serial Micro Second Bus interfaces (MSC) for serial port expansion to external power devices
– Two MultiCAN+ Module with 6 CAN nodes and 384 free assignable messageobjects for high efficiency data
handling via FIFO buffering and gateway data transfer
– 15 Single Edge Nibble Transmission (SENT) channels for connection to sensors
– Up to two FlexRay^TMmodule with 2 channels (E-Ray) supporting V2.1
– One Generic Timer Module (GTM) providing a powerful set of digital signal filteringand timer functionality
to realize autonomous and complex Input/Output management
– One Capture / Compare 6 module (Two kernels CCU60 and CCU61)
Data Sheet
1-1
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06