TC290 Datasheet, PDF (436/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller

TC290 / TC297 / TC298 / TC299 BB-Step
Electrical SpecificationInter-IC (I2C) Interface Timing
Table 3-93 I2C Standard Mode Timing (cont’d)
Parameter
Symbol
Min.
Set-up time for (repeated)
t₈
4.7
START condition
Set-up time for STOP condition t₉
4
Values
Typ.
-
Max.
-
-
-
Unit Note / Test Condition
µs
Measured with a pull-
up resistor of 4.7
kohms at each of the
SCL and SDA line
µs
Measured with a pull-
up resistor of 4.7
kohms at each of the
SCL and SDA line
Table 3-94 I2C Fast Mode Timing
Parameter
Symbol
Fall time of both SDA and SCL t₁
Values
Min.
Typ.
20+0.1*C -
b
Max.
300
Capacitive load for each bus C_b SR
-
-
400
line
Bus free time between a STOP t₁₀
1.3
-
-
and ATART condition
Rise time of both SDA and SCL t₂
Data hold time
t₃
20+0.1*C -
300
b
0
-
-
Data set-up time
t₄
100
-
-
Low period of SCL clock
t₅
1.3
-
-
High period of SCL clock
t₆
0.6
-
-
Unit Note / Test Condition
ns
Measured with a pull-
up resistor of 4.7
kohms at each of the
SCL and SDA line
pF
µs
Measured with a pull-
up resistor of 4.7
kohms at each of the
SCL and SDA line
ns
Measured with a pull-
up resistor of 4.7
kohms at each of the
SCL and SDA line
µs
Measured with a pull-
up resistor of 4.7
kohms at each of the
SCL and SDA line
ns
Measured with a pull-
up resistor of 4.7
kohms at each of the
SCL and SDA line
µs
Measured with a pull-
up resistor of 4.7
kohms at each of the
SCL and SDA line
µs
Measured with a pull-
up resistor of 4.7
kohms at each of the
SCL and SDA line
Data Sheet
3-430
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06