English
Language : 

TC290 Datasheet, PDF (470/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller
◁
TC290 / TC297 / TC298 / TC299 BB-Step
HistoryChanges from version version 0.6 to 0.71
– Remove footnote 'Derating factors:
-2 dB in standard-performance mode.
-3 dB for CMV = 10B, i.e. VCM = (VAREF±2%) / 2.0.' from SFDR
– Add footnote 'SFDR = 20 * log(INL / 2N)' to SFDR
– Change description of dVCM from 'Common Mode Voltage Accuracy' to 'Common mode voltage accuracy'
– Change description of dVCMH from 'Commom mode hold voltage deviation' to 'Common mode hold
voltage deviation'
– Change min value of SNR from 70 dB to 74 dB
– Change min value of SNR from 65 dB to 70 dB
– Change min value of SNR from 72 dB to 76 dB
– Add typ 100 kHz to fPB
– Add typ 30 kHz to fPB
• EVR/LDO/1.3V
– Change note of dVout/dIout from 'dI=-150mA; Tsettle=20µs; pass device=off chip' to 'dI=-150mA;
Tsettle=20µs; pass device=off chip'
– Change note of dVout/dIout from 'dI=100mA; Tsettle=20µs; pass device=off chip' to 'dI=100mA;
Tsettle=20µs; pass device=off chip'
– Add max 6.3 µF to COUT
– Add min 3 µF to COUT
• EVR/LDO/3.3V
– Change note of dVout/dIout from 'dI=100mA; Tsettle=20µs' to 'dI=50mA/20ns; Tsettle=20us'
– Change note of dVout/dIout from 'dI=-100mA; Tsettle=20µs' to 'dI=-70mA/20ns; Tsettle=20us'
• FLASH
– Change max value of tPRD from 75 µs to 50 + 2500/(fFSI [MHz]) µs
– Change note of tMERP from 'For consecutive logical sectors in a physical sector' to 'For consecutive logical
sectors in a physical sector, cycle count < 1000'
– Change max value of tPRP5 from 80 µs to 50 + 3000/(fFSI [MHz]) µs
– Change max value of tPRP3 from 115 µs to 81 + 3400/(fFSI [MHz]) µs
– Change max value of tPRPB5 from 220 µs to 125 + 9500/(fFSI [MHz]) µs
– Change note of tPRPB5_1MB from 'Derived value for documentation purpose' to 'Derived value for
documentation purpose, valid for fFSI = 100MHz'
– Change note of tPRPB5_PF from 'Derived value for documentation purpose' to 'Derived value for
documentation purpose, valid for fFSI = 100MHz'
– Change note of tMERD from 'For consecutive logical sectors' to 'For consecutive logical sector range of size
S, cycle count < 125000'
– Change max value of tMERD from 1 s to 0.928 + 0.019 * (S [KByte]) / (fFSI [MHz]) s
– Change max value of tPRDB from 140 µs to 96 + 4400/(fFSI [MHz]) µs
– Change max value of tSPNDD from 120 µs to 12000/(fFSI [MHz]) µs
– Change max value of tPRPB3 from 530 µs to 410 + 12000/(fFSI [MHz]) µs
– Change max value of tADD from 20 µs to 15 + 500/(fFSI [MHz]) µs
– Change max value of tSPNDP from 120 µs to 12000/(fFSI [MHz]) µs
– Change note of tERD from '' to 'cycle count < 125000'
– Change max value of tERD from 1 s to 0.928 + 0.15/(fFSI [MHz]) s
Data Sheet
4-464
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06
 ▷