English
Language : 

TC290 Datasheet, PDF (333/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller
TC290 / TC297 / TC298 / TC299 BB-Step
Electrical Specification5 V / 3.3 V switchable Pads
Table 3-9 Class MP 5V (cont’d)
Parameter
Symbol
Values
Unit Note / Test Condition
Min.
Typ.
Max.
Rise / fall time for MP pad 3) tMP CC
-
-
95+2.1*C ns
CL≤50pF ; pin out
L
driver=weak
-
-
200+2.9*( ns
CL≥50pF ; CL≤200pF ;
CL-50)
pin out driver=weak
-
-
25+0.5*C ns
CL≤50pF ; pin out
L
driver=medium
-
-
50 + 0.75 ns
CL≥50pF ; CL≤200pF ;
* ( CL - 50
pin out driver=medium
)
-
-
17.5+0.25 ns
CL≤50pF ;
*CL
edge=medium ; pin out
driver=strong
-
-
30+0.3*( ns
CL≥50pF ; CL≤200pF ;
CL-50)
edge=medium ; pin out
driver=strong
-
-
7+0.2*CL ns
CL≤50pF ; edge=sharp
; pin out driver=strong
-
-
17+0.3*( ns
CL≥50pF ; CL≤200pF ;
CL-50)
edge=sharp ; pin out
driver=strong
Input high voltage for MP pad VIHMP SR (0.73*VEX -
-
V
Hysteresis active, AL
T/FLEX)-
0.25
2.03 4)
-
-
V
Hysteresis active, TTL
Input low voltage for MP pad VILMP SR -
-
(0.52*VEX V
Hysteresis active, AL
T/FLEX)-
0.25
-
-
0.8 5)
V
Hysteresis active, TTL
Input low / high voltage for MP VILHMP CC 1.85
-
pad
3.0
V
Hysteresis inactive
Pad set-up time for MP pad tSET_MP CC -
-
Short Circuit current for MP pad ISC SR
-10
-
6)
100
ns
10
mA absolute max value
(PSI5)
Deviation of symmetry for rising SYM CC -
-
20
%
and falling edges
1) Hysteresis is implemented to avoid metastable states and switching due to internal ground bounce. It can't be guaranteed
that it suppresses switching due to external system noise.
2) For currents smaller than the IOL/OH from the test condition the defined Max. value stays unchanged.
3) Rise / fall times are defined 10% - 90% of VEXT/FLEX.
4) VIHx = 0.27 * VEXT/FLEX + 0.545V
5) VILx = 0.17 * VEXT/FLEX
6) The values are only valid if the pad is not used during operation, otherwise ISC defines the limits for operation.
Data Sheet
3-327
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06