TC290 Datasheet, PDF (460/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller

TC290 / TC297 / TC298 / TC299 BB-Step
HistoryChanges from version version 0.6 to 0.71
– Change max value of PD from 2030 mW to 2140 mW
– Change note of PD from 'real power pattern' to 'real power pattern. valid for Feature Package T, TP, TC,
TX, and TY products'
– Change max value of PD from 1575 mW to 1600 mW
– Change max value of I_DDFL3 from 75 mA to 84 mA
– Change note of I_DDPORST from '' to 'valid for Feature Package T, TP, TC, TX, and TY products'
– Change max value of I_DDM from 73 mA to 62 mA
– Change max value of I_SLEEP from 20 mA to 24 mA
– Change note of I_DD from 'max power pattern' to 'max power pattern. valid for Feature Package T, TP, TC,
TX, and TY products'
– Change note of I_DD from 'real power pattern' to 'real power pattern. valid for Feature Package T, TP, TC,
TX, and TY products'
– Change max value of I_DDAMU from 52 mA to 48 mA
– Change max value of I_EXTRAIL from 99 mA to 98 mA
– Change note of I_DDTOT from 'real power pattern' to 'real power pattern. valid for Feature Package T, TP, TC,
TX, and TY products'
– Add footnote 'In case EVR33 is not used, Injection current into 3.3V VDDP3 supply rail with active sink on
5V VEXT rail should be limited to 500 mA if during power sequencing 3.3V is supplied before 5V by
external regulator.' to I_DDx3RAIL
– Change max value of I_DDC10 from 54 mA to 62 mA
– Change max value of I_DDC11 from IDDC10 + 50 mA to IDDC10 + 48 mA
– Change max value of I_DDC20 from 50 mA to 60 mA
– Change max value of I_EXT/FLEX from 6 mA to 16 mA
– Change note of I_DDPORST from 'valid for SAK-TC29xTA-... products' to 'valid for Feature Package TA and
TB products'
– Change note of I_DDPORST from '' to 'valid for Feature Package T, TP, TC, TX, and TY products'
– Change max value of I_DDM from 46 mA to 52 mA
– Change note of I_DDPORST from 'valid for SAK-TC29xTA-... products' to 'valid for Feature Package TA and
TB products'
– Change note of I_DDPORST from '' to 'valid for Feature Package T, TP, TC, TX, and TY products'
– Change note of I_DDPORST from 'valid for SAK-TC29xTA-... products' to 'valid for Feature Package TA and
TB products'
– Change max value of I_DDM from 27 mA to 10 mA
– Change max value of I_DDM from 80 mA to 100 mA
– Change max value of I_DDM from 51 mA to 20 mA
– Update footnote of Power Supply to ' A single converter instance of VADC unit consumes 2 mA.'
– Change note of I_DD from 'max power pattern with f_SRI/CPUx = 270 MHz with V_DD = 1.235V + 7.5%' to 'max
power pattern with f_SRI/CPUx = 270 MHz with V_DD = 1.235V + 7.5%; valid for Feature Package T, TP, and TC
products'
– Change note of I_DD from 'max power pattern. valid for Feature Package T, TP, TC, TX, and TY products'
to 'max power pattern. valid for Feature Package T, TP, and TC products'
– Change note of PD from 'real power pattern. valid for Feature Package T, TP, TC, TX, and TY products' to
'real power pattern. valid for Feature Package T, TP, and TC products'
Data Sheet
4-454
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06