TC290 Datasheet, PDF (433/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller

TC290 / TC297 / TC298 / TC299 BB-Step
Electrical SpecificationHSCT Parameters
Table 3-90 LVDSH - Reduced TX and RX (RED) (cont’d)
Parameter
Symbol
Values
Min.
Typ.
Receiver differential input
R_in CC
90
100
impedance
80
100
Slew rate
SRtx CC -
-
Change in VOS between 0 and dVOS CC -
-
1
Max.
110
120
2
50
Change in Vod between 0 and dVod CC -
-
50
1
Fall time ¹⁾
t_fall CC
0.26
-
1.2
Rise time ¹⁾
t_rise CC
0.26
-
1.2
1) Rise / fall times are defined for 10% - 90% of V_OD
Unit Note / Test Condition
Ohm
Ohm
V/ns
mV
mV
ns
ns
0 V < V_I < 1.6V
1.6 V < V_I < 2.0V
Peak to peak
(including DC
transients).
Peak to peak
(including DC
transients)
Rt = 100 Ohm ±20%
@2pF
Rt = 100 Ohm ±20%
@2pF
Table 3-91 HSCT PLL
Parameter
Symbol
PLL frequency range
f_PLL CC
PLL input frequency
f_REF CC
PLL lock-in time
t_LOCK CC
Bit Error Rate based on 10 MHz BER₁₀ CC
reference clock at Slave PLL
side
Min.
12.5
10
-
-
Bit Error Rate based on 20 MHz BER₂₀ CC -
reference clock at Slave PLL
side
Absolute RMS Jitter (TX out) J_ABS10 CC -125
Absolute RMS Jitter (TX out) J_ABS20 CC -85
Values
Typ.
320
-
-
-
Max.
320
20
50
10EXP-9
Unit
MHz
MHz
µs
-
-
10EXP- -
12
-
125
ps
-
85
ps
Note / Test Condition
Bit Error Rate based
on Slave interface
reference clock at 10
MHz
Bit Error Rate based
on Slave interface
reference clock at 20
MHz
Measured at link TX
out; valid for
Reference frequency
at 10 MHz
Measured at link TX
out; valid for
Reference frequency
at 20 MHz
Data Sheet
3-427
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06