|
TC290 Datasheet, PDF (462/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller | |||
|
◁ |
TC290 / TC297 / TC298 / TC299 BB-Step
HistoryChanges from version version 0.6 to 0.71
â Add min 4.5 V to VFLEXE
â Add parameter VFLEXE
â Change description of VFLEXE from 'Digital supply voltage for Extended Flex port' to 'Digital supply voltage
for EBU Flex port'
â Add min 2.97 V to VFLEXE
â Add max 5.5 V to VFLEXE
â Add max 4.5 V to VFLEXE
â Add typ 3.3 V to VFLEXE
â Add typ 5.0 V to VFLEXE
⢠Changes in table 'Class F' of Standard_Pads
â Remove footnote 'VILx = 0.25 * VDDP3 - 0.058V' from VILF
â Add footnote 'VILx = 0.25 * VDDP3 + 0.058V' to VILF
⢠Changes in table 'Class MPR 5V' of Standard_Pads
â Change min value of HYSMPR from 0.1 * VEXT/FLEX V to 0.09 * VEXT/FLEX V
â Change min value of HYSMPR from 0.08 * VEXT/FLEX V to 0.075* VEXT/FLEX V
⢠Changes in table 'Class I 5V' of Standard_Pads
â Change min value of HYSI from 0.08 * VEXT/FLEX V to 0.075 * VEXT/FLEX V
â Change max value of VILHI from 2.85 V to 3.0 V
â Change min value of HYSI from 0.1 * VEXT/FLEX V to 0.09 * VEXT/FLEX V
â Change min value of HYSI from 0.073 * VEXT/FLEX V to 0.07 * VEXT/FLEX V
⢠Changes in table 'Class A2' of Standard_Pads
â Remove footnote 'VILx = 0.25 * VDDP3 - 0.058V' from VILA2
â Add footnote 'VILx = 0.25 * VDDP3 + 0.058V' to VILA2
⢠Changes in table 'Class I 3.3V' of Standard_Pads
â Change min value of HYSI from 0.047 * VEXT/FLEX V to 0.045 * VEXT/FLEX V
⢠Changes in table 'Class MP 5V' of Standard_Pads
â Change max value of VILHMP from 2.85 V to 3.0 V
â Change min value of HYSMP from 0.1 * VEXT/FLEX V to 0.09 * VEXT/FLEX V
â Change min value of HYSMP from 0.08 * VEXT/FLEX V to 0.075 * VEXT/FLEX V
⢠Changes in table 'Class LP 5V' of Standard_Pads
â Change min value of HYSLP from 0.1 * VEXT/FLEX V to 0.09 * VEXT/FLEX V
â Change min value of HYSLP from 0.08 * VEXT/FLEX V to 0.075 * VEXT/FLEX V
â Change max value of VILHLP from 2.85 V to 3.0 V
⢠Changes in table 'Class MP+ 5V' of Standard_Pads
â Change min value of HYSMPP from 0.1 * VEXT/FLEX V to 0.09 * VEXT/FLEX V
â Change max value of VILHMPP from 2.85 V to 3.0 V
â Change min value of HYSMPP from 0.08 * VEXT/FLEX V to 0.075 * VEXT/FLEX V
â Add footnote 'For currents smaller than the IOL/OH from the test condition the defined Max. value stays
unchanged.' to RDSONMPRW
â Add footnote 'For currents smaller than the IOL/OH from the test condition the defined Max. value stays
unchanged.' to RDSONMPRM
Data Sheet
4-456
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06
|
▷ |