TC290 Datasheet, PDF (367/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller

TC290 / TC297 / TC298 / TC299 BB-Step
Electrical SpecificationPower Supply Current
3.13
Power Supply Current
The total power supply current defined below consists of leakage and switching component.
Application relevant values are typically lower than those given in the following table and depend on the customer's
system operating conditions (e.g. thermal connection or used application configurations).
The operating conditions for the parameters in the following table are:
The real (realisic) power pattern defines the following conditions:
• T_J = 150 °C
• f_CPU0 = 200 MHz
• f_SRI = f_MAX = f_CPU1 = f_CPU2 300 MHz
• f_SPB = f_STM = f_GTM = f_BAUD1 = f_BAUD2 = f_ASCLIN = 50 MHz
• V_DD = 1.326 V
• V_DDP3 = 3.366 V
• V_{EXT / FLEX} = V_DDM = 5.1 V
• all cores are active including one lockstep core
• the following peripherals are inactive: EBU, HSM, HSCT, Ethernet, PSI5, I2C, FCE, MTU, and 50% of the
DSADC channels
The max power pattern defines the following conditions:
• T_J = 150 °C
• f_CPU0 = 200 MHz
• f_SRI = f_MAX = f_CPU1 = f_CPU2 300 MHz
• f_SPB = f_STM = f_GTM = f_BAUD1 = f_BAUD2 = f_ASCLIN = 100 MHz
• V_DD = 1.43 V
• V_DDP3 = 3.63 V
• V_{EXT / FLEX} = V_DDM = 5.5 V
• all cores and lockstep cores are active
• all peripherals are active
Data Sheet
3-361
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06