TC290 Datasheet, PDF (463/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller

TC290 / TC297 / TC298 / TC299 BB-Step
HistoryChanges from version version 0.6 to 0.71
– Add footnote 'For currents smaller than the I_OL/OH from the test condition the defined Max. value stays
unchanged.' to R_DSONMPRS
– Add footnote 'Rise / fall times are defined 10% - 90% of V_EXT/FLEX.' to t_MPR
• Changes in table 'LVDSH - Reduced TX and RX (RED)' of LVDSH
– Change description of t_fall from 'Fall time (10% - 90%)' to 'Fall time'
– Change description of t_rise from 'Rise time (10% - 90%)' to 'Rise time'
– Change description of t_fall from 'Fall time (10% - 90%)' to 'Fall time'
– Change description of t_rise from 'Rise time (10% - 90%)' to 'Rise time'
– Change note of V_OD from 'Rt = 100 Ohm +/- 20% @2pF' to 'Rt = 100 Ohm ±20% @2pF'
– Change note of V_OS from 'Rt = 100 Ohm +/- 20% @2pF' to 'Rt = 100 Ohm ±20% @2pF'
– Change note of V_OS from 'Rt = 100 Ohm +/- 20% @2pF' to 'Rt = 100 Ohm ±20% @2pF'
– Change note of V_OS from 'Rt = 100 Ohm +/- 20% @2pF' to 'Rt = 100 Ohm ±20% @2pF'
– Change note of V_OD from 'Rt = 100 Ohm +/- 20% @2pF' to 'Rt = 100 Ohm ±20% @2pF'
– Change note of t_rise from 'Rt = 100 Ohm +/- 20% @2pF' to 'Rt = 100 Ohm ±20% @2pF'
– Change note of t_fall from 'Rt = 100 Ohm +/- 20% @2pF' to 'Rt = 100 Ohm ±20% @2pF'
– Change note of V_OL from 'Rt = 100 Ohm +/- 20%' to 'Rt = 100 Ohm ±20%'
– Change note of V_OH from 'Rt = 100 Ohm +/- 20%' to 'Rt = 100 Ohm ±20%'
– Change note of t_rise from 'Rt = 100 Ohm +/- 20% @2pF' to 'Rt = 100 Ohm ±20% @2pF'
– Change note of V_OD from 'Rt = 100 Ohm +/- 20% @2pF' to 'Rt = 100 Ohm ±20% @2pF'
– Change note of t_fall from 'Rt = 100 Ohm +/- 20% @2pF' to 'Rt = 100 Ohm ±20% @2pF'
• Changes in table 'LVDSH - IEEE standard LVDS reduced link (REDL)' of LVDSH
– Change description of t_rise10 from 'Vod Rise time (10% - 90%)' to 'V_OD Rise time'
– Change description of t_fall10 from 'Vod Fall time (10% - 90%)' to 'V_OD Fall time'
– Change note of V_OH from 'RT = 100 Ohm +/- 5%' to 'RT = 100 Ohm ±5%'
– Change note of V_OS from 'RT = 100 Ohm +/- 5%' to 'RT = 100 Ohm ±5%'
– Change note of t_rise10 from 'ZL = 100 Ohm +/- 5% @ 2pF' to 'ZL = 100 Ohm ±5% @ 2pF'
– Change note of t_fall10 from 'ZL = 100 Ohm +/- 5% @ 2pF' to 'ZL = 100 Ohm ±5% @ 2pF'
– Change note of V_OD from 'RT = 100 Ohm +/- 5%' to 'RT = 100 Ohm ±5%'
– Change note of dVod from 'RT = 100 Ohm +/- 5%' to 'RT = 100 Ohm ±5%'
– Change note of V_OS from 'RT = 100 Ohm +/- 5%' to 'RT = 100 Ohm ±5%'
– Change note of dVOS from 'RT = 100 Ohm +/- 5%' to 'RT = 100 Ohm ±5%'
– Change note of V_OL from 'RT = 100 Ohm +/- 5%' to 'RT = 100 Ohm ±5%'
– Change note of V_OD from 'RT = 100 Ohm +/- 5%' to 'RT = 100 Ohm ±5%'
• Changes in table 'LVDSH - IEEE standard LVDS general purpose link (GPL)' of LVDSH
– Change description of t_rise20 from 'Rise time (20% - 80%)' to 'Rise time'
– Change description of t_fall20 from 'Fall time (20% - 80%)' to 'Fall time'
– Add footnote 'Rise / fall times are defined for 20% - 80% of V_OD' to t_rise20
– Add footnote 'Rise / fall times are defined for 10% - 90% of V_OD' to t_rise
– Add footnote 'Rise / fall times are defined for 20% - 80% of V_OD' to t_fall20
– Add footnote 'Rise / fall times are defined for 10% - 90% of V_OD' to t_rise10
– Add footnote 'Rise / fall times are defined for 10% - 90% of V_OD' to t_fall10
– Add footnote 'Rise / fall times are defined for 10% - 90% of V_OD' to t_fall
Data Sheet
4-457
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06