English
Language : 

TC290 Datasheet, PDF (471/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller
◁
TC290 / TC297 / TC298 / TC299 BB-Step
HistoryChanges from version version 0.71 to 1.0
– Add typ 0.207 + 0.003 * (S [KByte]) / (fFSI [MHz]) s to tERP
– Add typ 0.12 + 0.08/(fFSI [MHz]) s to tERD
– Add typ 0.207 + 0.003 * (S [KByte]) / (fFSI [MHz]) s to tMERP
– Add typ 0.12 + 0.01 * (S [KByte]) / (fFSI [MHz]) s to tMERD
– Add typ 0.57 + 0.15/(fFSI [MHz]) s to tERD
– Add typ 0.57 + 0.019 * (S [KByte]) / (fFSI [MHz]) s to tMERD
• Changes in table 'Class MP+ 3.3V' of Standard_Pads
– Add 5.42 ns to Class MP+ 3.3V
– Add 5.9 ns to Class MP+ 3.3V
– Add 7.65 ns to Class MP+ 3.3V
– Add 7.36 ns to Class MP+ 3.3V
– Add 4.8 ns to Class MP+ 3.3V
– Add 5.32 ns to Class MP+ 3.3V
– Add max 5.42 ns to tMPP
– Add max 5.9 ns to tMPP
– Add max 7.65 ns to tMPP
– Add max 7.36 ns to tMPP
– Add max 4.8 ns to tMPP
– Add max 5.32 ns to tMPP
4.2
Changes from version version 0.71 to 1.0
• DSADC
– Change min value of IOZ6 from -2 % to -3 µA %
• DSADC_33V
– Change min value of EDGAIN from -0.2 % to -0.3 %
– Change max value of EDGAIN from 0.2 % to 0.3 %
– Change min value of IOZ6 from -2 % to -3 µA %
• Changes in table 'Overload Parameters' of Overload
– Change min value of IINANA from -1 mA to -3 mA
– Change note of KOVAN from 'else; -1mA < IIN < 0mA' to 'else; -5mA < IIN < 0mA'
– Change note of KOVAN from '-5mA < IIN < -1mA' to 'Analog Inputs overlaid with class LP pads or pull down
diagnostics; -5mA < IIN < -1mA'
– Change max value of KOVAN from 3*10-3 to 1*10-2
• Reset Timings
– Change max value of tBP from 1.1 ms to 1.11 ms
• VADC
– Change typ value of QCONV from 3 pC to 10 pC
– Change typ value of QCONV from 14 pC to 50 pC
– Change min value of IOZ3 from -1 µA to -2.5 µA
– Change note of ENRMS from 'target' to ''
– Change max value of QCONV from 20 pC to 75 pC
Data Sheet
4-465
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06
 ▷