TC290 Datasheet, PDF (465/476 Pages) Infineon Technologies AG – 32-Bit Single-Chip Micocontroller

TC290 / TC297 / TC298 / TC299 BB-Step
HistoryChanges from version version 0.6 to 0.71
– Add 'V_AREFx = V_AREF2' T_J=150 °C to T_J
– Add max 2 µA to I_OZ2
– Change note of I_OZ2 from '' to 'V_AREFx = V_AREF2'
– Add footnote 'This parameter is valid for soldered devices and requires careful analog board design.' to
ENRMS
– Change note of TUE from '12-bit resolution' to '12-bit Resolution; T_J ≤ 150 °C'
– Change note of TUE from '12-bit resolution' to '12-bit Resolution; T_J ≤ 150 °C'
– Change note of EA_DNL from '' to '12-bit resolution'
– Change note of EA_DNL from '' to '12-bit resolution'
– Change note of EA_INL from '' to '12-bit Resolution; T_J ≤ 150 °C'
– Change note of EA_INL from '' to '12-bit Resolution; T_J ≤ 150 °C'
– Change note of EA_OFF from '' to '12-bit Resolution; T_J ≤ 150 °C'
– Change note of EA_OFF from '' to '12-bit Resolution; T_J ≤ 150 °C'
– Change note of EA_GAIN from '' to '12-bit Resolution; T_J ≤ 150 °C'
– Change note of EA_GAIN from '' to '12-bit Resolution; T_J ≤ 150 °C'
– Change note of Q_CONV from 'V_AIN = 3.3V, charge consumed from reference pin, precharging disabled' to
'V_AIN = 3.3 V, charge consumed from reference pin, precharging disabled'
– Change note of Q_CONV from 'V_AIN = 3.3V, charge consumed from reference pin, precharging enabled' to
'V_AIN = 3.3 V, charge consumed from reference pin, precharging enabled'
– Add min -12 LSB to TUE
– Add max 12 LSB to TUE
– Add min -12 LSB to EA_INL
– Add max 12 LSB to EA_INL
– Add min -6 LSB to EA_OFF
– Add max 6 LSB to EA_OFF
– Add min -6 LSB to EA_GAIN
– Add max 6 LSB to EA_GAIN
– Add min -6 µA to I_OZ2
– Add min -3.5 µA to I_OZ2
– Add max 6 µA to I_OZ2
– Add max 3.5 µA to I_OZ2
– Add min -6.5 µA to I_OZ3
– Add min -12 µA to I_OZ3
– Add max 6.5 µA to I_OZ3
– Add max 12 µA to I_OZ3
– Add max 10 % to dVCSD
– Add max 28 kOhm to R_CSD
– Add min V_SSM V to V_AGND
– Add min V_SSM V to V_AGND
• EVR/DCDC
– Update footnote of DCDC to 'Incase of TC29x running with fSRI = 300 MHz, it shall be ensured that the
VDD operating range is limited to 1.235V upto 1.430V. The DCDC may be configured in this case with a
Data Sheet
4-459
V 1.1 2015-05
TC290/TC297/TC298/TC299 BB-Step Data Sheet downloaded by saravanakumar maniyam (larsen and Toubro limited) at 08 Sep 2015 08:06