|
MC9S12XD256CAL Datasheet, PDF (1077/1348 Pages) Freescale Semiconductor, Inc – This specification describes the function of the clocks and reset generator (CRG). | |||
|
◁ |
Chapter 26 4 Kbyte EEPROM Module (S12XEETX4KV2)
R
W
Reset
7
EDIVLD
0
6
PRDIV8
5
EDIV5
4
EDIV4
3
EDIV3
2
EDIV2
0
0
0
0
0
= Unimplemented or Reserved
Figure 26-4. EEPROM Clock Divider Register (ECLKDIV)
1
EDIV1
0
0
EDIV0
0
All bits in the ECLKDIV register are readable, bits 6â0 are write once and bit 7 is not writable.
Table 26-3. ECLKDIV Field Descriptions
Field
Description
7
EDIVLD
6
PRDIV8
5â0
EDIV[5:0]
Clock Divider Loaded
0 Register has not been written.
1 Register has been written to since the last reset.
Enable Prescalar by 8
0 The oscillator clock is directly fed into the ECLKDIV divider.
1 Enables a Prescalar by 8, to divide the oscillator clock before feeding into the clock divider.
Clock Divider Bits â The combination of PRDIV8 and EDIV[5:0] effectively divides the EEPROM module input
oscillator clock down to a frequency of 150 kHz â 200 kHz. The maximum divide ratio is 512. Please refer to
Section 26.4.1.1, âWriting the ECLKDIV Registerâ for more information.
26.3.2.2 RESERVED1
This register is reserved for factory testing and is not accessible.
7
6
5
4
3
2
1
0
R
0
0
0
0
0
0
0
0
W
Reset
0
0
0
0
0
0
0
0
= Unimplemented or Reserved
Figure 26-5. RESERVED1
All bits read 0 and are not writable.
26.3.2.3 RESERVED2
This register is reserved for factory testing and is not accessible.
Freescale Semiconductor
MC9S12XDP512 Data Sheet, Rev. 2.21
1079
|
▷ |