COP8AME9_14 Datasheet, PDF (25/102 Pages) Texas Instruments – COP8AME9 8-Bit CMOS Flash Microcontroller with 8k Memory, Dual Op Amps, Virtual EEPROM, Temperature Sensor, 10-Bit A/D and Brownout Reset

COP8AME9, COP8ANE9
www.ti.com
HSTCR Register (Address X′00AF)
SNOS930F – MARCH 2001 – REVISED MARCH 2013
T2IDLE
Bit 7
Reserved
The HSTCR register contains the following bits:
T2IDLE Allows T2 to run while in Idle Mode.
T3HS Places Timer T3 in High Speed Mode.
T2HS Places Timer T2 in High Speed Mode.
T3HS
T2HS
Bit 0
ITMR Register (Address X′00CF)
LSON
Bit 7
HSON
DCEN
CCKS
EL
RSVD
ITSEL2
ITSEL1
The ITMR register contains the following bits:
LSON Turns the low speed oscillator on or off.
HSON Turns the high speed oscillator on or off.
DCEN Selects the high speed oscillator or the low speed oscillator as the Idle Timer Clock.
CCKSEL Selects the high speed oscillator or the low speed oscillator as the primary CPU clock.
RSVD This bit is reserved and must be 0.
ITSEL2 Idle Timer period select bit.
ITSEL1 Idle Timer period select bit.
ITSEL0 Idle Timer period select bit.
ITSEL0
Bit 0
ENAD Register (Address X′00CB)
ADCH3
Bit 7
ADCH2
ADCH1
Channel Select
ADCH0
ADMOD
Mode Select
MUX
Mux Out
PSC
Prescale
ADBSY
Busy
Bit 0
The ENAD register contains the following bits:
ADCH3 ADC channel select bit
ADCH2 ADC channel select bit
ADCH1 ADC channel select bit
ADCH0 ADC channel select bit
ADMOD Places the ADC in single-ended or differential mode.
MUX Enables the ADC multiplexor output.
PSC Switches the ADC clock between a divide by one or a divide by sixteen of MCLK.
ADBSY Signifies that the ADC is currently busy performing a conversion. When set by the user, starts a
conversion.
Copyright © 2001–2013, Texas Instruments Incorporated
Submit Documentation Feedback
25
Product Folder Links: COP8AME9 COP8ANE9