COP8AME9_14 Datasheet, PDF (14/102 Pages) Texas Instruments – COP8AME9 8-Bit CMOS Flash Microcontroller with 8k Memory, Dual Op Amps, Virtual EEPROM, Temperature Sensor, 10-Bit A/D and Brownout Reset

COP8AME9, COP8ANE9
SNOS930F – MARCH 2001 – REVISED MARCH 2013
www.ti.com
Figure 3. I/O Port Configurations
Figure 4. I/O Port Configurations—Output Mode
Figure 5. I/O Port Configurations—Input Mode
EMULATION CONNECTION
Connection to the emulation system is made via a 2 x 7 connector which interrupts the continuity of the RESET,
G0, G1, G2 and G3 signals between the COP8 device and the rest of the target system (as shown in Figure 6).
This connector can be designed into the production PC board and can be replaced by jumpers or signal traces
when emulation is no longer necessary.
The emulator will replicate all functions of G0 - G3 and Reset. For proper operation, no connection should be
made on the device side of the emulator connector.
Figure 6. Emulation Connection
14
Submit Documentation Feedback
Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: COP8AME9 COP8ANE9