HD64F3664BPV Datasheet, PDF (9/446 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer

5. When the E7 or E8 is used, address breaks can be set as either available to the user or for use
by the E7 or E8. If address breaks are set as being used by the E7 or E8, the address break
control registers must not be accessed.
6. When the E7 or E8 is used, NMI is an input/output pin (open-drain in output mode), P85 and
P87 are input pins, and P86 is an output pin.
Related Manuals:
The latest versions of all related manuals are available from our web site.
Please ensure you have the latest versions of all documents you require.
http://www.renesas.com/
H8/3664 Group manuals:
Document Title
H8/3664 Group Hardware Manual
H8/300H Series Software Manual
Document No.
This manual
REJ09B0213
User's manuals for development tools:
Document Title
Document No.
H8S, H8/300 Series C/C++ Compiler, Assembler, Optimizing Linkage Editor
User's Manual
REJ10B0058
H8S, H8/300 Series Simulator/Debugger User's Manual
REJ10B0211
H8S, H8/300 Series High-Performance Embedded Workshop 3 Tutorial
REJ10B0024
H8S, H8/300 Series High-performance Embedded Workshop 3 User's Manual REJ10B0026
Application notes:
Document Title
H8S, H8/300 Series C/C++ Compiler Package Application Note
Single Power Supply F-ZTAT^TM On-Board Programming
Document No.
REJ05B0464
REJ05B0520
Rev. 6.00 Mar. 24, 2006 Page vii of xxviii