HD64F3664BPV Datasheet, PDF (234/446 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer

Section 14 Serial Communication Interface 3 (SCI3)
Initial
Bit
Bit Name Value R/W Description
3
PER
0
R/W Parity Error
[Setting condition]
When a parity error is generated during reception
[Clearing condition]
When 0 is written to PER after reading PER = 1
2
TEND
1
R
Transmit End
[Setting conditions]
• When the TE bit in SCR3 is 0
• When TDRE = 1 at transmission of the last bit of a
1-byte serial transmit character
[Clearing conditions]
• When 0 is written to TEND after reading TEND = 1
• When the transmit data is written to TDR
1
MPBR
0
R
Multiprocessor Bit Receive
MPBR stores the multiprocessor bit in the receive
character data. When the RE bit in SCR3 is cleared to
0, its previous state is retained.
0
MPBT
0
R/W Multiprocessor Bit Transfer
MPBT stores the multiprocessor bit to be added to the
transmit character data.
Rev. 6.00 Mar. 24, 2006 Page 204 of 412
REJ09B0142-0600