HD64F3664BPV Datasheet, PDF (225/446 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer

Section 13 Watchdog Timer
13.3 Operation
The watchdog timer is provided with an 8-bit counter. If 1 is written to WDON while writing 0 to
B2WI when the TCSRWE bit in TCSRWD is set to 1, TCWD begins counting up. (To operate
the watchdog timer, two write accesses to TCSRWD are required.) When a clock pulse is input
after the TCWD count value has reached H'FF, the watchdog timer overflows and an internal reset
signal is generated.
The
internal
reset
signal
is
output
for
a
period
of
256
φ
osc
clock
cycles.
TCWD
is a writable counter, and when a value is set in TCWD, the count-up starts from that value. An
overflow period in the range of 1 to 256 input clock cycles can therefore be set, according to the
TCWD set value.
Figure 13.2 shows an example of watchdog timer operation.
Example: With 30ms overflow period when φ = 4 MHz
4 × 10⁶ _{× 30 × 10–3 = 14.6}
8192
Therefore, 256 – 15 = 241 (H'F1) is set in TCW.
H'FF
H'F1
TCWD
count value
TCWD overflow
H'00
Start
H'F1 written
to TCWD
Internal reset
signal
H'F1 written to TCWD
Reset generated
256 φ_osc clock cycles
Figure 13.2 Watchdog Timer Operation Example
Rev. 6.00 Mar. 24, 2006 Page 195 of 412
REJ09B0142-0600