PIC18F87J11_12 Datasheet, PDF (62/466 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Flash Microcontrollers

PIC18F87J11 FAMILY
TABLE 5-3: INITIALIZATION CONDITIONS FOR ALL REGISTERS⁽⁴⁾ (CONTINUED)
Register
Applicable Devices
Power-on Reset,
Brown-out Reset
MCLR Resets,
WDT Reset,
RESET Instruction,
Stack Resets,
CM Resets
Wake-up via WDT
or Interrupt
INDF2
PIC18F6XJ1X PIC18F8XJ1X
N/A
N/A
N/A
POSTINC2 PIC18F6XJ1X PIC18F8XJ1X
N/A
N/A
N/A
POSTDEC2 PIC18F6XJ1X PIC18F8XJ1X
N/A
N/A
N/A
PREINC2
PIC18F6XJ1X PIC18F8XJ1X
N/A
N/A
N/A
PLUSW2
PIC18F6XJ1X PIC18F8XJ1X
N/A
N/A
N/A
FSR2H
PIC18F6XJ1X PIC18F8XJ1X ---- xxxx
---- 0000
---- uuuu
FSR2L
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
STATUS
PIC18F6XJ1X PIC18F8XJ1X ---x xxxx
---u uuuu
---u uuuu
TMR0H
PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
TMR0L
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
T0CON
PIC18F6XJ1X PIC18F8XJ1X 1111 1111
1111 1111
uuuu uuuu
OSCCON
PIC18F6XJ1X PIC18F8XJ1X 0110 q100
0110 q100
0110 q10u
REFOCON PIC18F6XJ1X PIC18F8XJ1X 0-00 0000
u-uu uuuu
u-uu uuuu
CM1CON
PIC18F6XJ1X PIC18F8XJ1X 0001 1111
0001 1111
uuuu uuuu
CM2CON
PIC18F6XJ1X PIC18F8XJ1X 0001 1111
0001 1111
uuuu uuuu
RCON⁽⁴⁾
PIC18F6XJ1X PIC18F8XJ1X 0-11 1100
0-qq qquu
u-qq qquu
TMR1H
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
ODCON1
PIC18F6XJ1X PIC18F8XJ1X ---0 0000
---u uuuu
---u uuuu
TMR1L
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
ODCON2
PIC18F6XJ1X PIC18F8XJ1X ---- --00
---- --uu
---- --uu
T1CON
PIC18F6XJ1X PIC18F8XJ1X 0000 0000
u0uu uuuu
uuuu uuuu
ODCON3
PIC18F6XJ1X PIC18F8XJ1X ---- --00
---- --uu
---- --uu
TMR2
PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
PADCFG1
PIC18F6XJ1X PIC18F8XJ1X
---- ---0
---- ---u
---- ---u
PR2
PIC18F6XJ1X PIC18F8XJ1X 1111 1111
1111 1111
1111 1111
MEMCON
PIC18F6XJ1X PIC18F8XJ1X 0-00 --00
0-00 --00
u-uu --uu
T2CON
PIC18F6XJ1X PIC18F8XJ1X -000 0000
-000 0000
-uuu uuuu
SSP1BUF
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
SSP1ADD
PIC18F6XJ1X PIC18F8XJ1X
0000 0000
0000 0000
uuuu uuuu
SSP1MSK
PIC18F6XJ1X PIC18F8XJ1X
1111 1111
uuuu uuuu
uuuu uuuu
SSP1STAT PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
SSP1CON1 PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
SSP1CON2 PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
Legend: u = unchanged; x = unknown; - = unimplemented bit, read as ‘0’; q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be effected (to cause wake-up).
4: See Table 5-2 for Reset value for specific conditions.
DS39778E-page 62
 2007-2012 Microchip Technology Inc.