PIC18F87J11_12 Datasheet, PDF (439/466 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Flash Microcontrollers

PIC18F87J11 FAMILY
TABLE 28-30: A/D CONVERTER CHARACTERISTICS: PIC18F87J11 FAMILY (INDUSTRIAL)
Param
No.
Symbol
Characteristic
Min
Typ
Max Units
Conditions
A01 NR
Resolution
—
—
10
bit VREF  3.0V
A03 EIL
Integral Linearity Error
—
—
<±1
LSb VREF  3.0V
A04 EDL Differential Linearity Error
—
—
<±1
LSb VREF  3.0V
A06 EOFF Offset Error
—
—
<±3
LSb VREF  3.0V
A07 EGN Gain Error
—
—
<±3
LSb VREF  3.0V
A10 —
Monotonicity
Guaranteed⁽¹⁾
— VSS  VAIN  VREF
A20 VREF Reference Voltage Range
(VREFH – VREFL)
2.0
—
3
—
—
V VDD  3.0V
—
V VDD  3.0V
A21 VREFH Reference Voltage High
VSS + VREF —
VDD
V
A22 VREFL Reference Voltage Low
VSS – 0.3V — VDD – 3.0V V
A25 VAIN Analog Input Voltage
VREFL
—
VREFH
V
A30 ZAIN Recommended Impedance of
—
—
2.5
k
Analog Voltage Source
A50 IREF VREF Input Current⁽²⁾
—
—
5
A During VAIN acquisition.
—
—
150
A During A/D conversion
cycle.
Note 1: The A/D conversion result never decreases with an increase in the input voltage and has no missing codes.
2: VREFH current is from RA3/AN3/VREF+ pin or VDD, whichever is selected as the VREFH source. VREFL
current is from RA2/AN2/VREF- pin or VSS, whichever is selected as the VREFL source.
FIGURE 28-24: A/D CONVERSION TIMING
BSF ADCON0, GO
(Note 2)
131
Q4
130
A/D CLK 132
A/D DATA
9
8
7 ^{... ...} 2
1
0
ADRES
ADIF
GO
SAMPLE
OLD_DATA
SAMPLING STOPPED
NEW_DATA
TCY (Note 1)
DONE
Note 1:
2:
If the A/D clock source is selected as RC, a time of TCY is added before the A/D clock starts. This allows the SLEEP instruction
to be executed.
This is a minimal RC delay (typically 100 ns), which also disconnects the holding capacitor from the analog input.
 2007-2012 Microchip Technology Inc.
DS39778E-page 439