English
Language : 

PIC18F87J11_12 Datasheet, PDF (27/466 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Flash Microcontrollers
PIC18F87J11 FAMILY
TABLE 1-4: PIC18F8XJ1X PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number Pin Buffer
80-TQFP Type Type
Description
PORTG is a bidirectional I/O port.
RG0/PMA8/ECCP3/P3A
RG0
PMA8
ECCP3
P3A
5
I/O
ST
Digital I/O.
O
—
Parallel Master Port address.
I/O
ST
Capture 3 input/Compare 3 output/PWM3 output.
O
—
ECCP3 PWM Output A.
RG1/PMA7/TX2/CK2
RG1
PMA7
TX2
CK2
6
I/O
ST
Digital I/O.
O
—
Parallel Master Port address.
O
—
EUSART2 asynchronous transmit.
I/O
ST
EUSART2 synchronous clock (see related RX2/DT2).
RG2/PMA6/RX2/DT2
RG2
PMA6
RX2
DT2
7
I/O
ST
Digital I/O.
I/O
—
Parallel Master Port address.
I
ST
EUSART2 asynchronous receive.
I/O
ST
EUSART2 synchronous data (see related TX2/CK2).
RG3/PMCS1/CCP4/P3D
RG3
PMCS1
CCP4
P3D
8
I/O
ST
Digital I/O.
I/O
—
Parallel Master Port Chip Select 1.
I/O
ST
Capture 4 input/Compare 4 output/PWM4 output.
O
—
ECCP3 PWM Output D.
RG4/PMCS2/CCP5/P1D
RG4
PMCS2
CCP5
P1D
10
I/O
ST
Digital I/O.
O
—
Parallel Master Port Chip Select 2.
I/O
ST
Capture 5 input/Compare 5 output/PWM5 output.
O
—
ECCP1 PWM Output D.
Legend: TTL = TTL compatible input
CMOS = CMOS compatible input or output
ST = Schmitt Trigger input with CMOS levels
Analog = Analog input
I = Input
O
= Output
P = Power
I2C = ST with I2C™ or SMB levels
OD = Open-Drain (no P diode to VDD)
Note 1: Alternate assignment for ECCP2/P2A when Configuration bit, CCP2MX, is cleared (Extended Microcontroller mode).
2: Default assignment for ECCP2/P2A for all devices in all operating modes (CCP2MX is set).
3: Default assignments for P1B/P1C/P3B/P3C (ECCPMX Configuration bit is set).
4: Alternate assignment for ECCP2/P2A when CCP2MX is cleared (Microcontroller mode).
5: Alternate assignments for P1B/P1C/P3B/P3C (ECCPMX Configuration bit is cleared).
6: Default assignment for PMP data and control pins when PMPMX Configuration bit is set.
7: Alternate assignment for PMP data and control pins when PMPMX Configuration bit is cleared (programmed).
 2007-2012 Microchip Technology Inc.
DS39778E-page 27