English
Language : 

PIC18F87J11_12 Datasheet, PDF (230/466 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Flash Microcontrollers
PIC18F87J11 FAMILY
FIGURE 19-8:
PWM DIRECTION CHANGE
SIGNAL
Period(1)
Period
P1A (Active-High)
P1B (Active-High)
DC
P1C (Active-High)
P1D (Active-High)
(Note 2)
DC
Note 1: The direction bit in the ECCP1 Control register (CCP1CON<7>) is written at any time during the PWM cycle.
2: When changing directions, the P1A and P1C signals switch before the end of the current PWM cycle at intervals
of 4 TOSC, 16 TOSC or 64 TOSC, depending on the Timer2 prescaler value. The modulated P1B and P1D signals
are inactive at this time.
FIGURE 19-9:
PWM DIRECTION CHANGE AT NEAR 100% DUTY CYCLE
Forward Period
t1
Reverse Period
P1A(1)
P1B(1)
P1C(1)
P1D(1)
DC
External Switch C(1)
External Switch D(1)
Potential
Shoot-Through
Current(1)
Note 1: All signals are shown as active-high.
2: tON is the turn-on delay of power switch QC and its driver.
3: tOFF is the turn-off delay of power switch QD and its driver.
DC
tON(2)
tOFF(3)
t = tOFF – tON(2,3)
DS39778E-page 230
 2007-2012 Microchip Technology Inc.