PIC16F193X Datasheet, PDF (364/418 Pages) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt Technology

PIC16F193X/LF193X
28.2 DC Characteristics: PIC16F193X/LF193X-I/E (Industrial, Extended) (Continued)
PIC16LF193X
PIC16F193X
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤ +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤ +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
D019
—
5.3
TBD
mA
3.0 FOSC = 32 MHz
—
6.0
TBD
mA
5.0 ^{HS Oscillator mode (Note 5)}
* These parameters are characterized but not tested.
Legend: TBD = To Be Determined
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in kΩ.
4: FVR and BOR are disabled.
5: 0.1 μF capacitor on VCAP (RA0).
DS41364A-page 362
Preliminary
© 2008 Microchip Technology Inc.