PIC16F193X Datasheet, PDF (363/418 Pages) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt Technology

PIC16F193X/LF193X
28.2 DC Characteristics: PIC16F193X/LF193X-I/E (Industrial, Extended) (Continued)
PIC16LF193X
PIC16F193X
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤ +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤ +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
D013*
—
200 TBD
μA
—
370 TBD
μA
—
450 TBD
μA
Supply Current (IDD)^{(1, 2)}
D014
—
450 TBD
μA
—
830 _TBD
μA
D014
—
475 TBD
μA
—
850 TBD
μA
—
980 TBD
μA
D015
—
130 TBD
μA
—
190 TBD
μA
D015
—
150 TBD
μA
—
210 TBD
μA
—
270 TBD
μA
D016*
—
980 _TBD
μA
—
1780 TBD
μA
D016*
—
1.0
TBD
mA
—
1.8
TBD
mA
—
2.0
TBD
mA
1.8 FOSC = 1 MHz
3.0 ^{EC Oscillator mode (Note 5)}
5.0
1.8 FOSC = 4 MHz
3.0 ^{EC Oscillator mode}
1.8 FOSC = 4 MHz
3.0 ^{EC Oscillator mode (Note 5)}
5.0
1.8 FOSC = 500 kHz
3.0 ^{MFINTOSC mode}
1.8 FOSC = 500 kHz
3.0 ^{MFINTOSC mode (Note 5)}
5.0
1.8 FOSC = 8 MHz
3.0 ^{HFINTOSC mode}
1.8 FOSC = 8 MHz
3.0 ^{HFINTOSC mode (Note 5)}
5.0
D017
—
1.5
TBD
mA
1.8 FOSC = 16 MHz
—
2.8
TBD
mA
3.0 ^{HFINTOSC mode}
D017
—
1.7
TBD
mA
1.8 FOSC = 16 MHz
—
2.9
TBD
mA
3.0 ^{HFINTOSC mode (Note 5)}
—
3.1
TBD
mA
5.0
D018
—
410 TBD
μA
—
710 TBD
μA
1.8 FOSC = 4 MHz
3.0 ^{EXTRC mode (Note 3, Note 5)}
D018
—
430 TBD
μA
—
730 TBD
μA
1.8 FOSC = 4 MHz
3.0 ^{EXTRC mode (Note 3, Note 5)}
—
860 TBD
μA
5.0
D019
—
5.3
TBD
mA
3.0 FOSC = 32 MHz
—
6.0
TBD
mA
3.6 ^{HS Oscillator mode}
* These parameters are characterized but not tested.
Legend: TBD = To Be Determined
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in kΩ.
4: FVR and BOR are disabled.
5: 0.1 μF capacitor on VCAP (RA0).
© 2008 Microchip Technology Inc.
Preliminary
DS41364A-page 361