PIC16F193X Datasheet, PDF (104/418 Pages) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt Technology

PIC16F193X/LF193X
6.6.2
PORTE FUNCTIONS AND OUTPUT
PRIORITIES
Each PORTE pin is multiplexed with other functions. The
pins, their combined functions and their output priorities
are briefly described here. For additional information,
refer to the appropriate section in this data sheet.
When multiple outputs are enabled, the actual pin
control goes to the peripheral with the lowest number in
the following lists.
RE0
1. SEG21 (LCD)
2. CCP3/P3A (CCP)
3. RE0
RE1
1. SEG22 (LCD)
2. P3B (CCP)
3. RE1
RE2
1. SEG23 (LCD)
2. CCP5 (CCP)
3. RE2
TABLE 6-5: SUMMARY OF REGISTERS ASSOCIATED WITH PORTE⁽¹⁾
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Register
on Page
ADCON0
—
CHS4 CHS3 CHS2 CHS1 CHS0 GO/DONE ADON
137
ANSELE
—
—
—
—
—
ANSE2 ANSE1 ANSE0
101
CCPxCON PxM1 PxM0 DCxB1 DCxB0 CCPxM3 CCPxM2 CCPxM1 CCPxM0 184
LATE
—
—
—
—
LATE3 LATE2 LATE1 LATE0
99
LCDCON
LCDEN SLPEN WERR
—
CS1
CS0
LMUX1 LMUX0
243
LCDSE2
SE23 SE22 SE21 SE20 SE19 SE18
SE17
SE16
247
PORTE
—
—
—
—
RE3
RE2
RE1
RE0
99
TRISE
—
—
—
—
TRISE3 TRISE2 TRISE1 TRISE0 101
WPUE
—
—
—
—
WPUE3
—
—
—
100
Legend: x = unknown, u = unchanged, – = unimplemented locations read as ‘0’. Shaded cells are not used by
PORTE.
Note 1: These registers are not implemented on the PIC16F1933/1936/1938 devices, read as ‘0’.
DS41364A-page 102
Preliminary
© 2008 Microchip Technology Inc.