|
S912XEP100J5MAG Datasheet, PDF (636/1324 Pages) Freescale Semiconductor, Inc – Features of the MC9S12XE-Family are listed here. Please see Table D-2.for memory options and Table D-2. for the peripheral features that are available on the different family members. | |||
|
◁ |
Chapter 16 Freescaleâs Scalable Controller Area Network (S12MSCANV3)
16.3.3.1.2 IDR0âIDR3 for Standard Identiï¬er Mapping
Module Base + 0x00X0
7
6
5
4
3
2
1
0
R
ID10
ID9
ID8
ID7
ID6
ID5
ID4
ID3
W
Reset:
x
x
x
x
x
x
x
x
Figure 16-30. Identiï¬er Register 0 â Standard Mapping
Table 16-31. IDR0 Register Field Descriptions â Standard
Field
7-0
ID[10:3]
Description
Standard Format Identiï¬er â The identiï¬ers consist of 11 bits (ID[10:0]) for the standard format. ID10 is the
most signiï¬cant bit and is transmitted ï¬rst on the CAN bus during the arbitration procedure. The priority of an
identiï¬er is deï¬ned to be highest for the smallest binary number. See also ID bits in Table 16-32.
Module Base + 0x00X1
7
6
5
4
3
2
1
0
R
ID2
ID1
ID0
RTR
IDE (=0)
W
Reset:
x
x
x
x
x
x
x
x
= Unused; always read âxâ
Figure 16-31. Identiï¬er Register 1 â Standard Mapping
Field
7-5
ID[2:0]
4
RTR
3
IDE
Table 16-32. IDR1 Register Field Descriptions
Description
Standard Format Identiï¬er â The identiï¬ers consist of 11 bits (ID[10:0]) for the standard format. ID10 is the
most signiï¬cant bit and is transmitted ï¬rst on the CAN bus during the arbitration procedure. The priority of an
identiï¬er is deï¬ned to be highest for the smallest binary number. See also ID bits in Table 16-31.
Remote Transmission Request â This ï¬ag reï¬ects the status of the Remote Transmission Request bit in the
CAN frame. In the case of a receive buffer, it indicates the status of the received frame and supports the
transmission of an answering frame in software. In the case of a transmit buffer, this ï¬ag deï¬nes the setting of
the RTR bit to be sent.
0 Data frame
1 Remote frame
ID Extended â This ï¬ag indicates whether the extended or standard identiï¬er format is applied in this buffer. In
the case of a receive buffer, the ï¬ag is set as received and indicates to the CPU how to process the buffer
identiï¬er registers. In the case of a transmit buffer, the ï¬ag indicates to the MSCAN what type of identiï¬er to send.
0 Standard format (11 bit)
1 Extended format (29 bit)
MC9S12XE-Family Reference Manual Rev. 1.25
636
Freescale Semiconductor
|
▷ |