|
S912XEP100J5MAG Datasheet, PDF (1322/1324 Pages) Freescale Semiconductor, Inc – Features of the MC9S12XE-Family are listed here. Please see Table D-2.for memory options and Table D-2. for the peripheral features that are available on the different family members. | |||
|
◁ |
Appendix F Ordering Information
Appendix F
Ordering Information
Customers can choose between ordering either the mask-speciï¬c partnumber or the generic / mask-
independent partnumber. Ordering the mask-speciï¬c partnumber enables the customer to specify which
particular maskset they receive whereas ordering the generic maskset means that the currently preferred
maskset (which may change over time) is shipped. In either case, the marking on the device will always
show the generic / mask-independent partnumber and the mask set number.
NOTE
The mask identiï¬er sufï¬x and the Tape & Reel sufï¬x are always both omitted from the
partnumber which is actually marked on the device.
For speciï¬c partnumbers to order, please contact your local sales ofï¬ce. The below ï¬gure illustrates the
structure of a typical mask-speciï¬c ordering number for the MC9S12XE-Family devices
S 9 12X EP100 J1 C AG R
Tape & Reel
R = Tape & Reel
No R = No Tape & Reel
AA = 80 QFP
Package Option
AL = 112 LQFP
AG = 144 LQFP
VL = 208 MAPBGA
Temperature Option C = -40ËC to 85ËC
V = -40ËC to 105ËC
M = -40ËC to 125ËC
Maskset identifier Suffix
First digit references fab
J=TSMC3, F=ATMC,
W=TSMC11, Blank= flexible fab
Second digit refers to mask or firmware revision
Numeric second digit = mask rev. (e.g.1=1M48H)
A=firmware revA, version ID=0xFFFF
B=firmware revB, version ID=0x0004
(This suffix is omitted in generic partnumbers)
Device Title
Controller Family
Main Memory Type:
9 = Flash
3 = ROM (if available)
Status / Partnumber type:
S or SC = Maskset specific partnumber
MC = Generic / mask-independent partnumber
P or PC = prototype status (pre qualification)
Figure F-1. Order Part Number Example
1322
MC9S12XE-Family Reference Manual Rev. 1.25
Freescale Semiconductor
|
▷ |