DS162 Datasheet, PDF (73/73 Pages) Xilinx, Inc – Advance Product Specification

Spartan-6 FPGA Data Sheet: DC and Switching Characteristics
Date
06/14/10
06/24/10
07/16/10
07/26/10
08/23/10
Version
1.5
1.6
1.7
1.8
1.9
Description of Revisions
In Table 2, added note 5 and added temperature range to V_FS and R_FUSE. Removed speed grade
delineation, revised I_RPD description, and updated note 2 in Table 4. Added note 2 to Table 7. Added
DIFF_MOBILE_DDR to Table 8 and Table 10. Added note 4 to Table 15. Changed minimum DV_PPIN in
Table 16. Updated F_GTPDRPCLK in Table 19. Increased maximum T_LLSKEW in Table 22. Updated
descriptions and added data to Table 23. Removed note 1 and added new data to the Networking
Applications section in Table 25. Updated Table 26 and Table 27 to the data in ISE v12.1 software with
speed specification v1.08. In Table 28, added DIFF_MOBILE_DDR and updated -4 speed grade data.
Updated the maximum I/O pairs per bank in Table 32. Updated note 2 on Table 38. Revised the F_MAX
in Table 43. In Table 46, updated description for T_SMCKCSO, revised values for T_POR and added Min
value, added T_BPIICCK and T_SPIICCK. Also in Table 46, added device dependencies to F_SMCCK and
F_RBCCK. Updated and added data to Table 61 through Table 75, and Table 78. In Table 76, added data
on the XC6SLX45-FG(G)676 and revised the XC6SLX45T and XC6SLX150T values.
The following changes to this specification are addressed in the product change notice
XCN10024, MCB Performance and JTAG Revision Code for Spartan-6 LX16 and LX45 FPGAs.
In Table 2, revised the V_CCINT to add the memory controller block extended performance
specifications. In Table 25, changed the standard specifications and added extended performance
specifications for the memory controller block and note 2. Added Note 4 and updated values in
Table 33.
Production release of XC6SLX45T (-2 and -3 speed grades), XC6SLX16 and XC6SLX45 (-3 speed
grade) devices which includes changes to Table 26 and Table 27 (ISE v12.1 software with speed
specification v1.08).
Added the -3N speed grade, which designates Spartan-6 devices that do not support MCB functionality
(specifications are identical to the -3 speed grade). This includes changes to Table 2 (note 2), Table 25
(note 4), and Switching Characteristics (Table 26).
Updated Simultaneously Switching Outputs discussion. Added -3 speed grade values for T_TAP and
F_MINCAL values in Table 38. In Table 39, updated T_RPW (-2 and -3 speed grade) values and F_TOG (-3
speed grade) values. In Table 47, updated T_GIO (-2 and -3 speed grade) values. Updated -3 values in
spread spectrum section of Table 55.
Production release of specific devices listed in Table 26 and Table 27 using ISE v12.2 software with
speed specification v1.11. Added Note 3 advising designers of the patch which contains v1.11. Also
updated the -1L speed specification to v1.04. Updated numerous -4 and -1L values. Added -4 T_TAP
values and F_MINCAL to Table 38. Revised T_CINCK/T_CKCIN in Table 39. In Table 40, revised T_SHCKO. In
Table 41, revised T_REG. Added new -1L values to Table 46. Added and updated values in Table 76.
Production release of XC6SLX25, XC6SLX25T, XC6SLX100 and XC6SLX100T in the specific speed
grades listed in Table 26 and Table 27 using ISE v12.2 software with speed specification v1.11. Added
note 7 to Table 2 and moved V_FS and R_FUSE to a new Table 3. Added I_HS and Note 4 to Table 4. Added
note 1 to Table 28. Added and updated SSO limits per V_CCO/GND pairs in Table 33. Added note 3 to
Table 46. In Table 52, removed -1L specifications for CLKOUT_PER_JITT_DV1/2 and revised
CLKIN_CLKFB_PHASE and CLKOUT_PHASE_DLL values. Updated note 3 in both Table 54 and
Table 55.
Updated values for F_GTPRANGE1, F_GTPRANGE2, and F_GPLLMIN in Table 18. Revised -3 and -4 values in
Table 21. Removed the -1L speed grade readback support restriction and Note 3 in Table 46.
Notice of Disclaimer
THE XILINX HARDWARE FPGA AND CPLD DEVICES REFERRED TO HEREIN (“PRODUCTS”) ARE SUBJECT TO THE TERMS AND
CONDITIONS OF THE XILINX LIMITED WARRANTY WHICH CAN BE VIEWED AT http://www.xilinx.com/warranty.htm. THIS LIMITED
WARRANTY DOES NOT EXTEND TO ANY USE OF PRODUCTS IN AN APPLICATION OR ENVIRONMENT THAT IS NOT WITHIN THE
SPECIFICATIONS STATED IN THE XILINX DATA SHEET. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PRODUCTS ARE NOT DESIGNED OR INTENDED TO BE FAIL-SAFE OR FOR USE IN ANY APPLICATION REQUIRING FAIL-SAFE
PERFORMANCE, SUCH AS LIFE-SUPPORT OR SAFETY DEVICES OR SYSTEMS, OR ANY OTHER APPLICATION THAT INVOKES
THE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). USE OF PRODUCTS IN CRITICAL APPLICATIONS IS AT THE SOLE RISK OF CUSTOMER, SUBJECT TO
APPLICABLE LAWS AND REGULATIONS.
DS162 (v1.9) August 23, 2010
www.xilinx.com
Advance Product Specification
73