DS162 Datasheet, PDF (1/73 Pages) Xilinx, Inc – Advance Product Specification

73
DS162 (v1.9) August 23, 2010
Spartan-6 FPGA Data Sheet:
DC and Switching Characteristics
Advance Product Specification
Spartan-6 FPGA Electrical Characteristics
Spartan®-6 LX FPGAs are available in -3, -2, and -1L speed grades, with -3 having the highest performance. Spartan-6 LXT
FPGAs are available in -4, -3, and -2 speed grades, with -4 having the highest performance. Spartan-6 FPGA DC and AC
characteristics are specified for both commercial and industrial grades. Except the operating temperature range or unless
otherwise noted, all the DC and AC electrical parameters are the same for a particular speed grade (that is, the timing
characteristics of a -2 speed grade industrial device are the same as for a -2 speed grade commercial device). However, only
selected speed grades and/or devices might be available in the industrial range. The -3N speed grade, designated for
Spartan-6 devices that do not support memory controller block (MCB) functionality, has identical timing characteristics to the
-3 speed grade.
All supply voltage and junction temperature specifications are representative of worst-case conditions. The parameters
included are common to popular designs and typical applications.
This Spartan-6 FPGA data sheet, part of an overall set of documentation on the Spartan-6 family of FPGAs, is available on
the Xilinx website.
All specifications are subject to change without notice.
Spartan-6 FPGA DC Characteristics
Table 1: Absolute Maximum Ratings ⁽¹⁾
Symbol
Description
Units
V_CCINT
V_CCAUX
V_CCO
V_BATT
Internal supply voltage relative to GND
–0.5 to 1.32 V
Auxiliary supply voltage relative to GND
–0.5 to 3.75 V
Output drivers supply voltage relative to GND
–0.5 to 3.75 V
Key memory battery backup supply (XC6SLX75, XC6SLX75T, XC6SLX100, XC6SLX100T, –0.5 to 4.05 V
XC6SLX150, and XC6SLX150T only)
V_FS
External voltage supply for eFUSE programming (XC6SLX75, XC6SLX75T, XC6SLX100, –0.5 to 3.75 V
XC6SLX100T, XC6SLX150, and XC6SLX150T only)⁽²⁾
V_REF
Input reference voltage
–0.5 to 3.75 V
DC
–0.60 to 4.10 V
Commercial 20% overshoot duration –0.75 to 4.25 V
All user and dedicated
I/Os
8% overshoot duration⁽⁵⁾ –0.75 to 4.40 V
DC
–0.60 to 3.95 V
Industrial 20% overshoot duration –0.75 to 4.15 V
I/O input voltage or voltage
V_IN and V_TS(3) applied to 3-state output,
relative to GND⁽⁴⁾
4% overshoot duration⁽⁵⁾ –0.75 to 4.40 V
20% overshoot duration –0.75 to 4.35 V
Commercial 15% overshoot duration⁽⁵⁾ –0.75 to 4.40 V
Restricted to
maximum of 100 user
I/Os
10% overshoot duration –0.75 to 4.45 V
20% overshoot duration –0.75 to 4.25 V
Industrial 10% overshoot duration –0.75 to 4.35 V
8% overshoot duration⁽⁵⁾ –0.75 to 4.40 V
© 2009–2010 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Spartan, ISE, and other designated brands included herein are trademarks of Xilinx in the United States and other
countries. All other trademarks are the property of their respective owners.
DS162 (v1.9) August 23, 2010
www.xilinx.com
Advance Product Specification
1