XQ2V1000 Datasheet, PDF (1/127 Pages) Xilinx, Inc – QPro Virtex-II 1.5V Military QML Platform FPGAs

R
QPro Virtex-II 1.5V Military QML
Platform FPGAs
DS122 (v1.1) January 7, 2004
Product Specification
Summary of QPro™ Virtex™-II Features
• Industry First Military Grade Platform FPGA Solution
• Certified to MIL-PRF-38535 (Qualified Manufacturer
Listing)
• 100% Factory Tested
• Guaranteed over the full military temperature range
(–55° C to +125° C)
• Ceramic and Plastic Wire-Bond and Flip-Chip Grid
Array Packages
• IP-Immersion Architecture
- Densities from 1M to 6M system gates
- 300+ MHz internal clock speed (Advance Data)
- 622+ Mb/s I/O (Advance Data)
• SelectRAM™ Memory Hierarchy
- 2.5 Mb of dual-port RAM in 18 Kbit block
SelectRAM resources
- Up to 1 Mb of distributed SelectRAM resources
• High-Performance Interfaces to External Memory
- DRAM interfaces
· SDR/DDR SDRAM
· Network FCRAM
· Reduced Latency DRAM
- SRAM interfaces
· SDR/DDR SRAM
· QDR SRAM
- CAM interfaces
• Arithmetic Functions
- Dedicated 18-bit x 18-bit multiplier blocks
- Fast look-ahead carry logic chains
• Flexible Logic Resources
- Up to 67,584 internal registers/latches with Clock
Enable
- Up to 67,584 look-up tables (LUTs) or cascadable
16-bit shift registers
- Wide multiplexers and wide-input function support
- Horizontal cascade chain and sum-of-products
support
- Internal 3-state busing
• High-Performance Clock Management Circuitry
- Up to 12 DCM (Digital Clock Manager) modules
· Precise clock de-skew
· Flexible frequency synthesis
· High-resolution phase shifting
- 16 global clock multiplexer buffers
• Active Interconnect Technology
- Fourth generation segmented routing structure
- Predictable, fast routing delay, independent of
fanout
• SelectIO™-Ultra Technology
- Up to 824 user I/Os
- 19 single-ended and six differential standards
- Programmable sink current (2 mA to 24 mA) per
I/O
- Digitally Controlled Impedance (DCI) I/O: on-chip
termination resistors for single-ended I/O standards
- PCI compliant (32/33 MHz) at 3.3V
- Differential Signaling
· 622 Mb/s Low-Voltage Differential Signaling I/O
(LVDS) with current mode drivers
· Bus LVDS I/O
· Lightning Data Transport (LDT) I/O with current
driver buffers
· Low-Voltage Positive Emitter-Coupled Logic
(LVPECL) I/O
· Built-in DDR input and output registers
- Proprietary high-performance SelectLink
Technology
· High-bandwidth data path
· Double Data Rate (DDR) link
· Web-based HDL generation methodology
• Supported by Xilinx Foundation Series™ and Alliance
Series™ Development Systems
- Integrated VHDL and Verilog design flows
- Compilation of 10M system gates designs
- Internet Team Design (ITD) tool
• SRAM-Based In-System Configuration
- Fast SelectMAP configuration
- Triple Data Encryption Standard (DES) security
option (Bitstream Encryption)
- IEEE 1532 support
- Partial reconfiguration
- Unlimited reprogrammability
- Readback capability
• 0.15 µm 8-Layer Metal Process with 0.12 µm
High-Speed Transistors
• 1.5V (V_CCINT) Core Power Supply, Dedicated 3.3V
V_CCAUX Auxiliary and V_CCO I/O Power Supplies
• IEEE 1149.1 Compatible Boundary-Scan Logic
Support
© 2004 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and disclaimers are as listed at http://www.xilinx.com/legal.htm.
All other trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.
DS122 (v1.1) January 7, 2004
www.xilinx.com
1
Product Specification
1-800-255-7778