PIC16F707 Datasheet, PDF (93/284 Pages) Microchip Technology – 40/44-Pin, Flash Microcontrollers with nanoWatt XLP and mTouch™ Technology

PIC16F707/PIC16LF707
REGISTER 11-1: DACCON0: VOLTAGE REFERENCE CONTROL REGISTER 0
R/W-0/0
R/W-0/0
R/W-0/0
U-0
R/W-0/0
R/W-0/0
U-0
DACEN
DACLPS
DACOE
—
DACPSS1 DACPSS0
—
bit 7
U-0
—
bit 0
Legend:
R = Readable bit
u = bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
q = Value depends on condition
bit 7
bit 6
bit 5
bit 4
bit 3-2
bit 1-0
DACEN: Digital-to-Analog Converter Enable bit
0 = Digital-to-Analog Converter is disabled
1 = Digital-to-Analog Converter is enabled
DACLPS: DAC Low-Power Voltage State Select bit
0 = VDAC = DAC negative reference source selected
1 = VDAC = DAC positive reference source selected
DACOE: DAC Voltage Output Enable bit
0 = DAC voltage level is output on the DACOUT pin
1 = DAC voltage level is disconnected from the DACOUT pin
Unimplemented: Read as ‘0’
DACPSS<1:0>: DAC Positive Source Select bits
00 = VDD
01 = VREF
10 = FVR Buffer 2 output
11 = Reserved, do not use
Unimplemented: Read as ‘0’
REGISTER 11-2: DACCON1: VOLTAGE REFERENCE CONTROL REGISTER 1
U-0
—
bit 7
U-0
U-0
R/W-0/0 R/W-0/0
R/W-0/0
R/W-0/0
—
—
DACR4
DACR3
DACR2
DACR1
R/W-0/0
DACR0
bit 0
Legend:
R = Readable bit
u = bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-5
bit 4-0
Unimplemented: Read as ‘0’
DACR<4:0>: DAC Voltage Output Select bits
 2010 Microchip Technology Inc.
Preliminary
DS41418A-page 93