PIC16F707 Datasheet, PDF (77/284 Pages) Microchip Technology – 40/44-Pin, Flash Microcontrollers with nanoWatt XLP and mTouch™ Technology

PIC16F707/PIC16LF707
8.2 Code Protection
If the code protection bit(s) have not been
programmed, the on-chip program memory can be
read out using ICSP™ for verification purposes.
Note:
The entire Flash program memory will be
erased when the code protection is turned
off. See the “PIC16F707/PIC16LF707
Memory Programming Specification”
(DS41332) for more information.
8.3 User ID
Four memory locations (2000h-2003h) are designated
as ID locations where the user can store checksum or
other code identification numbers. These locations are
not accessible during normal execution, but are read-
able and writable during Program/Verify mode. Only
the Least Significant 7 bits of the ID locations are
reported when using MPLAB IDE. See the
“PIC16F707/PIC16LF707 Memory Programming
Specification” (DS41332) for more information.
 2010 Microchip Technology Inc.
Preliminary
DS41418A-page 77