PIC16F707 Datasheet, PDF (14/284 Pages) Microchip Technology – 40/44-Pin, Flash Microcontrollers with nanoWatt XLP and mTouch™ Technology

PIC16F707/PIC16LF707
TABLE 1-1: PIC16F707/PIC16LF707 PINOUT DESCRIPTION (CONTINUED)
Name
Function
Input Output
Type Type
Description
RB2/AN8/CPSB10
RB2
TTL CMOS General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull-up.
AN8
AN
— A/D Channel 8 input.
CPSB10 AN
— Capacitive sensing B input 10.
RB3/AN9/CPSB11/CCP2
RB3
TTL CMOS General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull-up.
AN9
AN
— A/D Channel 9 input.
CPSB11 AN
— Capacitive sensing B input 11.
CCP2
ST CMOS Capture/Compare/PWM2.
RB4/AN11/CPSB12
RB4
TTL CMOS General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull-up.
AN11
AN
— A/D Channel 11 input.
CPSB12 AN
— Capacitive sensing B input 12.
RB5/AN13/CPSB13/T1G/T3CKI
RB5
TTL CMOS General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull-up.
AN13
AN
— A/D Channel 13 input.
CPSB13 AN
— Capacitive sensing B input 13.
T1G
ST
— Timer1 gate input.
T3CKI
ST
— Timer3 clock input.
RB6/ICSPCLK/ICDCLK/CPSB14 RB6
TTL CMOS General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull-up.
ICSPCLK ST
— Serial Programming Clock.
ICDCLK ST
— In-Circuit Debug Clock.
CPSB14 AN
— Capacitive sensing B input 14.
RB7/ICSPDAT/ICDDAT/CPSB15 RB7
TTL CMOS General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull-up.
ICSPDAT ST CMOS ICSP™ Data I/O.
ICDDAT ST
— In-Circuit Data I/O.
CPSB15 AN
— Capacitive sensing B input 15.
RC0/T1OSO/T1CKI/CPSB2
RC0
ST CMOS General purpose I/O.
T1OSO XTAL XTAL Timer1 oscillator connection.
T1CKI
ST
— Timer1 clock input.
CPSB2 AN
— Capacitive sensing B input 2.
RC1/T1OSI/CCP2/CPSB3
RC1
ST CMOS General purpose I/O.
T1OSI XTAL XTAL Timer1 oscillator connection.
CCP2
ST CMOS Capture/Compare/PWM2.
CPSB3 AN
— Capacitive sensing B input 3.
RC2/CCP1/CPSB4/TBCKI
RC2
ST CMOS General purpose I/O.
CCP1
ST CMOS Capture/Compare/PWM1.
CPSB4 AN
— Capacitive sensing B input 4.
TBCKI
ST
— TimerB clock input.
RC3/SCK/SCL
RC3
ST CMOS General purpose I/O.
SCK
SCL
ST CMOS SPI clock.
I²C™ OD I²C™ clock.
Legend: AN = Analog input or output CMOS = CMOS compatible input or output
OD = Open Drain
TTL = TTL compatible input ST = Schmitt Trigger input with CMOS levels I²C™ = Schmitt Trigger input with I²C
HV = High Voltage
XTAL = Crystal
levels
DS41418A-page 14
Preliminary
 2010 Microchip Technology Inc.