PIC16F707 Datasheet, PDF (217/284 Pages) Microchip Technology – 40/44-Pin, Flash Microcontrollers with nanoWatt XLP and mTouch™ Technology

PIC16F707/PIC16LF707
TABLE 25-3: CLKOUT AND I/O TIMING PARAMETERS
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C TA +125°C
Param
No.
Sym.
Characteristic
Min.
Typ† Max. Units Conditions
OS11 TosH2ckL Fosc to CLKOUT ⁽¹⁾
—
— 70 ns VDD = 3.3-5.0V
OS12 TosH2ckH Fosc to CLKOUT ⁽¹⁾
—
— 72 ns VDD = 3.3-5.0V
OS13 TckL2ioV CLKOUT to Port out valid⁽¹⁾
—
— 20 ns
OS14 TioV2ckH Port input valid before CLKOUT⁽¹⁾
TOSC + 200 ns — — ns
OS15 TosH2ioV Fosc (Q1 cycle) to Port out valid
—
50 70* ns VDD = 3.3-5.0V
OS16 TosH2ioI Fosc (Q2 cycle) to Port input invalid
(I/O in hold time)
50
— — ns VDD = 3.3-5.0V
OS17
OS18
TioV2osH Port input valid to Fosc(Q2 cycle)
(I/O in setup time)
TioR
Port output rise time⁽²⁾
OS19 TioF
Port output fall time⁽²⁾
20
— — ns
—
40 72 ns VDD = 2.0V
—
15 32
VDD = 3.3-5.0V
—
28 55 ns VDD = 2.0V
—
15 30
VDD = 3.3-5.0V
OS20* Tinp
INT pin input high or low time
25
— — ns
OS21* Trbp
PORTB interrupt-on-change new input
TCY
level time
— — ns
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25C unless otherwise stated.
Note 1: Measurements are taken in RC mode where CLKOUT output is 4 x TOSC.
2: Includes OSC2 in CLKOUT mode.
 2010 Microchip Technology Inc.
Preliminary
DS41418A-page 217