PIC16F707 Datasheet, PDF (208/284 Pages) Microchip Technology – 40/44-Pin, Flash Microcontrollers with nanoWatt XLP and mTouch™ Technology

PIC16F707/PIC16LF707
25.3 DC Characteristics: PIC16F707/PIC16LF707-I/E (Power-Down) (Continued)
PIC16LF707
PIC16F707
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device Characteristics
Min.
Typ†
Max.
+85°C
Max.
+125°C
Units
VDD
Conditions
Note
D028D
—
145
—
—
150
—
—
A
1.8 Cap Sense High Range
—
A
3.0 ^{Medium Power (Note 6)}
—
160
—
—
A
5.0
D028E
D028E
†
Note 1:
2:
3:
4:
5:
6:
—
150
—
—
170
—
—
A
1.8 Cap Sense HighRange
—
A
3.0 ^{High Power (Note 6)}
—
180
—
—
190
—
—
A
1.8 Cap Sense High Range
—
A
3.0 ^{High Power (Note 6)}
—
200
—
—
A
5.0
Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD.
Fixed Voltage Reference is automatically enabled whenever the BOR is enabled.
A/D oscillator source is FRC.
0.1 F capacitor on VCAP (RA0).
Includes FVR IPD and DAC IPD.
DS41418A-page 208
Preliminary
 2010 Microchip Technology Inc.