SM320F2808-EP Datasheet, PDF (69/118 Pages) Texas Instruments – Digital Signal Processors

www.ti.com
SM320F2808-EP, SM320F2806-EP
SM320F2801-EP
Digital Signal Processors
SGLS316A – MARCH 2006 – REVISED FEBRUARY 2007
4.10 Inter-Integrated Circuit (I²C)
The 280x device contains one I²C Serial Port. Figure 4-15 shows how the I²C peripheral module interfaces
within the 280x device.
The I²C module has the following features:
• Compliance with the Philips Semiconductors I²C-bus specification (version 2.1):
– Support for 1-bit to 8-bit format transfers
– 7-bit and 10-bit addressing modes
– General call
– START byte mode
– Support for multiple master-transmitters and slave-receivers
– Support for multiple slave-transmitters and master-receivers
– Combined master transmit/receive and receive/transmit mode
– Data transfer rate of from 10 kbps up to 400 kbps (Philips Fast-mode rate)
• One 16-bit receive FIFO and one 16-bit transmit FIFO
• One interrupt that can be used by the CPU. This interrupt can be generated as a result of one of the
following conditions:
– Transmit-data ready
– Receive-data ready
– Register-access ready
– No-acknowledgment received
– Arbitration lost
– Stop condition detected
– Addressed as slave
• An additional interrupt that can be used by the CPU when in FIFO mode
• Module enable/disable capability
• Free data format mode
Submit Documentation Feedback
Peripherals
69